login / sign up / content filter is: on

Cars > battmann’s Garage > “Camaro S/C” > Albums > The Camaro's blown & injected 350 engine

“Camaro S/C”

1972 Chevrolet Camaro

view car

Share this Album (what’s this?)

Embed forum

Embed text

Permalink

Photos in the “The Camaro's blown & injected 350 engine” Album

: Description: I had this motor for a couple years before deciding to start rebuilding it. The motor came in a 1971 Chevelle that I bought in 2005. I ended up selling the Chevelle for what I paid for it, but I kept the motor.
I originally was going to install this engine in my '84 Trans Am, but since my '72 Camaro came with a dead engine it went in there instead. My goal was to have this engine in my Camaro and running by the end of summer 2007 - mission accomplished!
This album shows the build of this engine and all the upgrades that followed.; By: battmann; Filed under: 1972 Chevrolet Camaro (Camaro S/C); Number of photos: 45; Updated: Mon Sep 14, 2009 8:27 pm; 3 total

Page 1 of 3: 1 2 3 > Last >> Photos 1 – 21 of 45

: Here's the Chevelle I bought basically just to get this 350 engine....; 0; comment

: Not sure of the manufacturer on these 1.6 rockers.; 0; comment

: Starting on top, the engine has a B&M Superjection kit (142 blower...; 0; comment

: Here's the blower manifold. I tried to polish it myself by...; 0; comment

: This is the brain of the superjection kit. I hope all these old...; 0; comment

: There's 2.02/1.60 iron Dart heads. I purchased the B&M valve...; 0; comment

: I also have a NOS Powershot kit.; 0; comment

: 3-24-07 Today I polished one valve cover. It took over 3 hours....; 0; comment

: Here's how the air hat looked before being polished.; 0; comment

: 4-9-07 Finally got all my polishing done. Took forever, but turned...; 1; comment

: Intake manifold after polishing. I couldn't be happier with the...; 0; comment

: Pistons and rings were in great shape so they'll all be reused.; 0; comment

: Bare engine block ready to go to the machine shop.; 0; comment

: Assembled heads after being baked at the machine shop.; 0; comment

: Bottom of the assembled heads. I just found out my valves are...; 0; comment

: Putting the lower end together. I decided that for the extra $40 I...; 0; comment

: Got to use head studs with a blower. Looks like that guy in the...; 0; comment

: Now for the heads.; 0; comment

: I just had to test fit the blower to see how it looks. I was...; 0; comment

: Engine build as of 5-19-07; 0; comment

: 5-21-07 Today I painted the blower to match the engine. It was a...; 0; comment

Page 1 of 3: 1 2 3 > Last >> Photos 1 – 21 of 45

Cars > battmann’s Garage > “Camaro S/C” > Albums > The Camaro's blown & injected 350 engine

Print your passion at Motortopia.com (http://www.motortopia.com)