Cars > Challenges > “Drag car” Vs “SS0 CLEAN”
1978 Chevrolet Camaro
“Drag car”
1995 Chevrolet Impala SS
“SS0 CLEAN”
Head to Head
About “Drag car”
-78 Camaro body
-Fiberglass One piece front end
-Fiberglass doors
-Fiberglass trunk lid
-All Windows Lexan
Chassis
-Cage NHRA Certified to 8.50
-Tube Chassis, Round tube Strut front end
-Motor set back 15 inchs
-Ladder Bar Rear with Coilovers
-New Strange Single Adjustable Shocks
-Ford 9” Rear with 5.29 gears
-Strange Aluminum Case (9")
-Morser axles
-1350 U-Joints
-Wheelie Bars
-Strange Strunt front end
-Strange Front Brakes
-Wilwood Rear Disc Brakes
-Fits 32/14.5 Slick Goodyear
-15 x 15 Rear Welds
-15 x 3.5 Front Welds
Engine
-434 SBC (650 HP on dyno)
-MSD Dist
-Roller Cam, at .682 lift
-Brodix Heads (Ported) Flow 324
-2.08, 1.60 Stainless Valves
- Jessel Aluminum Roller Rockers With Shafts1.6 Ratio 7/16” Stud
-SRP Pistions 13.5:1
-Oliver Billet Rods
-Magnum Callies Crank
-Dart little M Block (4.030)
-Brodix Single Plane Intake (Flowed and Ported)
-975 Demon Race RS Carb
-Electric Water Pump
-7 Quart Oil Pan
- Custom Made Headers
-Transmission
-1.76 First Gear Powerglide
-BTE Transbrake
-JW Ultrabell
-Hurst Quarterstick Shifter, with elec. Solenoid
-Electric Fan Transmission Cooler
-5700 Coan Stall Converter
-Ignition
-MSD 6AL
-3 step
-RPM Activated Switch
-RPM Dial for Launch
-Biondo Elite 400 Delay Box
It runs a 6.01 @ 113.50 MPH in the 1/8 mile
with a 1.293 60' time and a 3.855 330"
About “SS0 CLEAN”
In 2005 i was looking to buy a '87 Monte Carlo LS until i found out i was going to be a father. So now i needed a 4dr. The 2000 Cadillac Deville caught my eye until i found out it was FWD (urgh!). As luck would have it my aunt's boss was selling the Impala SS. I really didnt think much of it until i got to drive it. He sold it to me for 3k. I could have easily turned and sold it for more, but i had already fallin inlove with it (4drs for the family and good muscle.. it wasnt a hard decision, lol). Hopefully this car will be around when my son is able to drive.
Specs for “Drag car”
Body
-78 Camaro body
-Fiberglass One piece front end
-Fiberglass doors
-Fiberglass trunk lid
-All Windows Lexan
Chassis
-Cage NHRA Certified to 8.50
-Backhalf Chassis, stock front end
-Motor set back past crossmember
-Ladder Bar Rear with Coilovers
-New Strange Single Adjustable Shocks
-Ford 9” Rear with 4.71 gears
-Strange Aluminum Case
-1350 U-Joints
-Wheelie Bars
-Moroso Springs in front with Comp 90/10 Shocks
-Fits 32/14.5 Slick (Toyos on now with good life left)
-15 x 15 rear Welds
-15 x 3.5 Front Welds
-Setup for BBC and SBC (BBC Plate and Headers inc.)
Engine
-383 SBC
-Burns Pump Gas 10:1
-Solid Lifter Cam, Around the .575 Range
-Dart 200 cc Straight Plugs
-K Motion Valve Springs
-2.02, 1.60 Stainless Valves
-Crane Aluminum Roller Rockers 1.6 Ratio 7/16” Stud
-Keith Black Hyperutectic Pistions
-X Rods
-Scat Cast Crank
-4 Bolt Main Block
-Hurricane Single Plane Intake
-750 Quick Fuel Carb New 6/08
-Electric Water Pump 6/08
-7 Quart Oil Pan
-Schoenfeld Headers
Transmission
-1.76 First Gear Powerglide
-BTE Transbrake
-JW Ultrabell
-Hurst Quarterstick Shifter, with elec. Solenoid
-Electric Fan Transmission Cooler
-5200 Stall BTE Converter (2 Years old)
Ignition
-MSD 6AL Box
-RPM Activated Switch
-RPM Dial for Launch
-3 step
-2 Red Top Optima Batteries
-Alternator (14.2 volts when running)
-Mallory Unilite Dist
old motor, 2008
Specs for “SS0 CLEAN”
No specifications listed.
Factory Options for “Drag car”
No factory options listed.
Factory Options for “SS0 CLEAN”
No factory options listed.
Mods for “Drag car”
Car runs a 6.990 in the 1/8
60' 1.576
330 4.533
1/8 6.990
MPH 98.12
best run in 2009
6.51 in the 1/8 @106 MPH
With my 385 motor
Fastest run with my 434
60' 1.293
330 3.855
1/8 6.015
MPH 113.50
Mods for “SS0 CLEAN”
Engine & Transmission
350 LT1 bored 30*
forged pistons
LT4 cam
1.6 rr and valvesprings
MSD cap & rotor
MSD coil
MSD 8.5mm wires
Mezeire HD electric water pump
RAISS intake
Air pump delete
EGR delete
Flowtech AfterBurner headers
Cat delete
2.5 exhaust w/ Magnaflow mufflers
2800 TC
CPT stage 2 transmission
Eaton Posi w/ 3.73 gears
38lb injectors
Racetronix fuelpump kit
PCMforless tune
52mm BBK TB
3.5 F-Body MAF
Suspension
Hotchkis lowering springs
Edelbrock shocks
UMI rear upper & lower control arms
Accessories
40k HIDS
AVIC-N4
Pioneer Components (front)
Infinity Components (rear)
2 15" L7 subs
MMATS 3500
Rockford Fosgate 850.4
Kinetik battery
200amp alternator
Smoked taillights
'61 Impala emblems
LED interior & exterior
LT1 scanmaster
Working on murdering out the car
Vote This challenge has ended!
| Points for Drag car | Total Votes | Points for SS0 CLEAN |
|---|---|---|
| 49 | 15 | 26 |
Cars > Challenges > “Drag car” Vs “SS0 CLEAN”
