1988 Chevrolet Monte Carlo Super Sport
1988 Ford Mustang GT
Head to Head
About “The SS”
This car is my baby, she gets what she wants all the time LOL.
My wife was actually the one that always wanted an SS as a friend of her family had one years ago and she always wanted one.
We bought this car with the stock engine in it and it didn't take long for me to take care of that.
I did the TPI swap on this car myself with a custom engine harness and chip. When I did the TPI swap I added a stock L-98 350 roller cam nad lifters to the stock engine to add a few ponies to the car.
While doing the TPI swap I also converted to a serpentine belt setup which switched the alternator and AC compressor side to side which meant finding AC lines which would allow me to keep the AC.
I know I don't need the cowl induction hood with the TPI, but the hood was on the car when we got it and I love the way it looks on the car.
About “Black Beauty”
I've had this car for 6 years now. it was my high school car and i have no plans of getting rid of it.
Specs for “The SS”
Fully loaded 1988 Monte Carlo SS hardtop.
Black exterior, grey interior
16x8 ZQ8 S-10 wheels
8.5 Posi 3.73 rear
World Class T5 trans swap
355 TPI ZZ4 clone engine, 375hp
Carhoods.com fiberglass hood
Specs for “Black Beauty”
so far a dissapointing 13.6 at 101mph
Factory Options for “The SS”
Fully loaded with:
Power trunk release
Factory Options for “Black Beauty”
Mods for “The SS”
I myself did most of these mods.
World Class T5 swap from 90 Camaro RS
F-body serpentine belt setup
SLP intake runners
Pollished Cold Air Intake
Aftermarket hood from Carhoods.com(looks like 98-02 Camaro SS hood)
Dynomax shorty headers(85098)
2.5" aluminumized exhaust(true duals)
Flowmaster 40 mufflers
4" aluminum driveshaft
Jegster true dual crossmember
Bell-Tech 2" drop spindles
Monroe Sensa-trac shocks
Rebuilt front suspension with all MOOG parts
Swapped the factory Laydown style spoiler for the older standup style.
'02 S-10 ZQ8 wheels with 245-50-16 Hankook tires
Panasonic CD player
Cavalier stearing wheel
White face guages
New for 08 355 SBC engine bored .030, steel crank, double roller timing chain, "Powdered metal" rods, ARP bolts, ZZ4 roller cam, Sealed power forged pistons, moly rings, Trick Flow "195" aluminum heads, hardened pushrods, "Bowtie" 1.5 roller rockers, ported TPI intake manifold, SLP runners, Accell ignition parts.
Mods for “Black Beauty”
Trickflow twisted wedge heads
Trickflow stage one cam
Trickflow Street heat intake
70mm throttle body
fully built aod
1.5" lowering springs
strut tower brace
Vote This challenge has ended!
|Points for The SS||Total Votes||Points for Black Beauty|