Cars > Forums > Tech Garage > Driver's door maintenance
Forum: Tech Garage
- Topic: Driver's door maintenance
- Started by Reynolds1961 Jun 15, 2007 at 12:40 pm
- Last post by khale Mar 8, 2011 at 2:35 am
- This topic has been viewed 1091 times and has 2 replies
Topic: Driver's door maintenance
Forums > Tech Garage > Driver's door maintenance
Page 1 of 1: 1 Posts 1 – 3 of 3
-
#1 Jun 15, 2007 at 12:40 pm
-
- Reynolds1961
- Total posts: 2
-
Send Message
I have a 2002 Stratus 4-door. It has power windows and locks. I need to know how to remove the power window switch cluster. I want to make sure I don't break any of the plastic interior pieces. -
-
#2 Sep 24, 2010 at 9:59 pm
-
- ozie
- Total posts: 20
-
Send Message
Well, cant help you on how to remove the power window switch cluster.
But, if i was in your situation I would replace my old switch with the AC Delco Window Switch then send it in any car shop and let them do the installing part of the switch if you don't know how to.
Chevrolet Truck Parts
Edited Sep 24, 2010 at 10:02 pm
-
-
#3 Mar 8, 2011 at 2:35 am
-
- khale
- Total posts: 32
-
Send Message
just follow this easy steps:
1
Inspect fuse box for blown fuses. Fuse box locations can be found in the vehicle owner's manual.
2
Remove the door panel by unclipping the handles and switches with a screw driver.
3
Locate power window switch.
4
Remove power window switch from the door panel.
5
Install new power window switch into the door panel.
6
Reconnect power window switch.
7
Reinstall door panel and power windows should be operative.
source:
http://www.au...indow-switch/ -
Page 1 of 1: 1 Posts 1 – 3 of 3
Forums > Tech Garage > Driver's door maintenance
Cars > Forums > Tech Garage > Driver's door maintenance
