Motortopia: Where your passion parks

Motortopia: Where your passion parks.

Why Join Motortopia? So you can post comments on... Forums! Photos! Vehicles! Garages! Journals! Events!

  1. cars
  2. bikes
  3. boats
  4. planes

Cars > Challenges > “jakes 69” Vs “Z28”

 

jim_sheila’s Profile Photo

jim_sheila

M–52
Spencer, Indiana
United States

woody2136’s Profile Photo

woody2136

M–28
Walton, New York
United States

 

1969 Chevrolet Camaro SS

“jakes 69”

1980 Chevrolet Camaro Z28

“Z28”

 
Photo of: 1969 Chevrolet Camaro
Photo of: 1980 Chevrolet Camaro
 

Head to Head

 

About “jakes 69”

this car had sit in a man's drive for 13 year's befor i found it,I bought it for my son who is 4 year's old.my son "JAKE" is the biggest car head i know.

About “Z28”

My work in progress street/track car. I rebuilt the engine for a gain of roughly 100hp and updated the interior with 4th-gen seats, console and all new gauges. The next year I did the rest of the driveline retrofitting a T56 6-speed with a new flywheel, clutch, shifter, driveshaft and 4.10 gears. I also rebuilt the front suspension with poly bushings and lowering springs, and wedged the subframe with solid body mounts and welding in connectors. I also upgraded the brake system with bigger rotors and converted the rear from drum to disc. To try and get the tires to hook I went with drag radials and adjustable traction bars. I also upgraded the fuel system and ignition. After I broke the rear end at the track I upgraded that also.

Next comes some body work at some point. Wheels are also on the list, and probably a shot of nitrous, because truth be told, I'm stupid like that.

2004 purchased
2005 interior swap
2006 355 build
2007 6spd swap
2008 brakes & suspension
2011 wheels & tires
2012 sold 355
2013 efi 383 build

 

Specs for “jakes 69”

All origional interior,327 motor with 69,000 miles.I still have the origional rim's for this car.

Specs for “Z28”

383ci/6spd, 550hp/520tq, 8.5" 10-bolt, posi, 4.10s, traction links, 4-wheel disc

1/4: high 11s i think

13.5 best with 355 with garbage 60's@106mph

 

Factory Options for “jakes 69”

4-speed trans.

Factory Options for “Z28”

350ci/4spd, 190hp/280tq

1/4: high 16s stock

 

Mods for “jakes 69”

cam,header's,intake,carb, the paint,stereo,and the carpet has been replaced

Mods for “Z28”

PERFORMANCE
forged Scat bottom end
AFR 195 Eliminator aluminum heads
Edelbrock roller cam (234/238 .575/.585")
Edelbrock 1000cfm throttle body
Hurricane EFI singe plane manifold
Accel DFI computer & wiring
Accel 36lb injectors & fuel rails
1-5/8 ceramic coated headers
3" x-pipe
Flowtech 3" cut outs
2.5" chambered mufflers & tail pipes
K&N filter
Equus gauges
custom fabbed gauge bezel
Summit shift light
B&M line lock
Summit driveshaft loop
4th-gen T56 6-speed trans
Pro5.0 short shifter
SPEC stage 3+ clutch (800ft-lb)
SPEC T56 retrofit steel flywheel (26lbs)
modified GM hydraulic clutch linkage (93-97 LT1 fbody)
Denny's Driveshaft 3" HD steel
Spicer u-joints
poly engine/trans mounts
solid body bushings (wedged install)
solid aluminum tie rod sleeves
aluminum radiator
gear reduction starter (to fit T56 bellhousing)
4.10:1 gears
Moser axles & rear cover
Welded axle tubes
Mickey Thompson 275/60/R15 drag radials
CE Slide-A-Link adjustable traction bars
Hotchkis 600lb coil springs
Pro-Touring F-Body 200-lb leafs
Alston Racing subframe connectors
Alston Racing triangle braces
12" front disc brakes (92 IROCZ)
Wilwood GMIII auminum calipers
11.6" rear disc (04 Blazer)
1" disc/disc master cylinder (79 Corvette)
Hawk Performance brake pads
Summit adjustable proportioning valve
Lokar custom ebrake cables
fiberglass pin-on 3" cowl hood
revamped electrical system
100 amp alternator
Proform electric water pump
60 amp electric fan
start solenoid & battery in trunk
NHRA-spec kill switch
SFI 18.1 harmonic balancer
-6AN braided stainless fuel feed & return lines
adjustable fuel pressure regulator

LOOKS
4th-gen leather seats, seat belts, console, shift boot & shift knob
lots of flat black, NO CHROME
Cavalier steering wheel
custom trim plates for dash (hvac & radio)


OLD 355
RPM AirGap intake manifold
Vortec heads (170cc, 64cc, 1.94/1.50)
Comp 280 cam (230/230 .480/.480)
1.5 ratio self-aligning rockers
TRW forged pistons
Hedman long-tube headers (1-5/8" primary, 3" collector)
MSD Ultimate HEI digital ignition w/ rev limit
750cfm Edelbrock 1407 carburetor

 

Photo Albums 1 – 2 of 3

Cover photo of more pic's album
more pic's
Photos: 5
Cover photo of jake's pic's album
jake's pic's
Photos: 14
 

Previous Photo Albums Next Albums

Photo Albums 1 – 2 of 13

Cover photo of paint job album
paint job
Photos: 74
Cover photo of EFI 383 album
EFI 383
Photos: 67
 

Previous Photo Albums Next Albums

 

Vote This challenge has ended!

Points for jakes 69 Total Votes Points for Z28
54 13 11

 

Comments on this challenge 1 – 2 of 2

Log in to post comments.

Read comments on this challenge (1 – 2 of 2)

Log in to view challenge comments.

Download Drive Magazine Now!

Advertisements

    Special Offers & Deals

Advertisement

 

Cars > Challenges > “jakes 69” Vs “Z28”

Print your passion at Motortopia.com (http://www.motortopia.com)