Motortopia: Where your passion parks.

Motortopia > Drag Racer > Features > Racing Tech > Little Tire Traction—Part I > DR-1105-FRAME-16-KS

 

Advertisement

Advertisement


Little Tire Traction—Part I » DR-1105-FRAME-16-KS

The frame was modified by cutting away the outer frame rail with a simple 4.5-inch angle grinder and a cut-off wheel. The frame rail was cut back to just past the factory seam, and the cuts were cleaned up with an angle grinder.

The frame was modified by cutting away the outer frame rail with a simple 4.5-inch angle grinder and a cut-off wheel. The frame rail was cut back to just past the factory seam, and the cuts were cleaned up with an angle grinder.


Leave a Comment

You must be logged in to post a comment.