>

Motortopia: Where your passion parks.

Motortopia > Drive! > Articles > Head Master Part 1 > 06JPEG

 

Advertisement

Advertisement

Head Master Part 1 » 06JPEG

6. The exterior surfaces of the head are then painted gloss black and the head is ready for machining. (Note: the heads can also be machined then prepped.)

6. The exterior surfaces of the head are then painted gloss black and the head is ready for machining. (Note: the heads can also be machined then prepped.)

5. With head turned over, the exhaust ports and head surface are carefully tapped off.
7. While Speilman was prepping one head for machining, head specialist Chad Langdon worked on the other head by honing the valve stem seals and the bronze valve guides to make certain they are concentric.

This entry was posted on Friday, July 16th, 2010 at 1:07 pm and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Comment

You must be logged in to post a comment.