>

Motortopia: Where your passion parks.

Motortopia > Drive! > Articles > Tech > Installing TCI’s 6X Six-Speed Transmission and Paddle Shifter > DRV-1102-TCI-PIX-07

 

Advertisement

Advertisement

Installing TCI’s 6X Six-Speed Transmission and Paddle Shifter » DRV-1102-TCI-PIX-07

The tranny cross member is bolted in place.

The tranny cross member is bolted in place.

Installing the upper bolts sure is easier with the car up on a lift and having a long extension for the pneumatic gun. But this job can be done on a garage floor using a tranny jack, just not as comfortably.
A few drops of LocTite are placed on the converter bolts before being installed and torqued to specs. Don’t forget this step, or the bolts may (but always seem to) work loose.

This entry was posted on Wednesday, March 23rd, 2011 at 11:25 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Comment

You must be logged in to post a comment.