>

Motortopia: Where your passion parks.

Motortopia > Drive! > Articles > Tech > From Cruiser to ‘Crosser: Installing a TCI Pro Touring IFS System > DRV-1104-TCI-PIX-02

 

Advertisement

Advertisement

From Cruiser to ‘Crosser: Installing a TCI Pro Touring IFS System » DRV-1104-TCI-PIX-02

TCI supplies the pieces raw, so the first step is to have them powder coated. We went to Embee Performance Coatings in Santa Ana, CA, for this job. The pieces are media blasted to prep the steel for the powder.

TCI supplies the pieces raw, so the first step is to have them powder coated. We went to Embee Performance Coatings in Santa Ana, CA, for this job. The pieces are media blasted to prep the steel for the powder.

Total Cost Involved’s new Chevy Nova Pro-Touring IFS is made from U.S. DOM steel right here in the USA. The system comes with (or TCI offers) everything that you will need to turn a Nova into a corner-carver.
The blasted pieces are thoroughly cleaned to remove any errant media material.

This entry was posted on Monday, May 16th, 2011 at 10:51 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Comment

You must be logged in to post a comment.