>

Motortopia: Where your passion parks.

Motortopia > Drive! > Articles > Tech > From Cruiser to ‘Crosser: Installing a TCI Pro Touring IFS System > DRV-1104-TCI-PIX-13

 

Advertisement

Advertisement

From Cruiser to ‘Crosser: Installing a TCI Pro Touring IFS System » DRV-1104-TCI-PIX-13

With the coolant drained, the radiator is pulled, followed by the core support. We’ll either paint the core support or have it blasted and powder coated.

With the coolant drained, the radiator is pulled, followed by the core support. We’ll either paint the core support or have it blasted and powder coated.

The suspension components are removed.
Here is where Sleeper deviates slightly from the instructions. Nobody really wanted to pull the engine, and he figured that we could still get at everything that we’d need to without pulling it. A bottle jack and a wooden 4 x 4 are used to hold the engine up while the motor mounts are removed. Note that the steering box is also removed at this time.

This entry was posted on Monday, May 16th, 2011 at 10:52 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Comment

You must be logged in to post a comment.