>

Motortopia: Where your passion parks.

Motortopia > Drive! > Articles > Tech > WEEKEND UPDATE > Drive-1008-Weekend_11

 

Advertisement

Advertisement

WEEKEND UPDATE » Drive-1008-Weekend_11

11 Sealant is applied to the water pump and allowed to get tacky. Be sure to circle the bolt holes with sealant as well as the main port to prevent possible leakage.

11 Sealant is applied to the water pump and allowed to get tacky. Be sure to circle the bolt holes with sealant as well as the main port to prevent possible leakage.

10 Installing the stout main unit takes a strong back, but that's what the posts are for. Simply slide the unit onto the posts, and they hold the unit in place while the water pump is prepped.
12 The water pump is slid over the posts and the lower bolts are installed. The posts are removed with a flat blade screwdriver and the upper bolts are installed. Simplicity itself.

This entry was posted on Wednesday, September 1st, 2010 at 4:05 pm and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Comment

You must be logged in to post a comment.