Motortopia: Where your passion parks

Motortopia: Where your passion parks.

Why Join Motortopia? Connect with other enthusiasts... Chat! Add Friends! Challenge! Private Message!

  1. cars
  2. bikes
  3. boats
  4. planes

Cars > Clubs > Lincoln Nights > Forums

 
     

    About Lincoln Nights Forums

    • 6 forums with topics and posts
    more search options
     

    Lincoln Nights Forums

    Forum
    Topics
    Posts
    members only
    General Discussion (members only)
    This forum is for general discussion relating to this group.
    0 0
    Drag Strip Information
    Details and comments about the location of a motorplex park in Lincoln.
    2 9
    Tech Advice
    1 1
    On Campus and Around Town
    Discuss events going on around the area.
    3 4
    For Sale or Trade
    0 0
    IMCA Sport Compact
    IMCA Sport Compact


    Cannot be licensed in any other division and must be at least 14 years old.

    Copyright © 2007 IMCA All rights reserved.
    No part of this publication may be reproduced, stored, or transmitted in any form, without prior written permission.

    1. SAFETY EQUIPMENT: Rules apply at all times car is on the race track. Snell-rated SA95, SA2000 or SA2005 helmet required. Roll bar padding required in driver compartment (Fire retardant recommended). SFI-approved full fire suit required. Fire retardant neck brace, gloves and shoes required. Driver-side window net required, minimum 16”x20” ribbon or mesh style, and must be mounted so latch is at top front of window. Minimum three-inch wide five point safety belt assembly required (Y-type shoulder harness not allowed) must be mounted securely to roll cage, recommended to be no more than one year old. Kill switch required within easy reach of driver and must be clearly marked “OFF” and”“ ON’.
    2. BODY/CHASSIS: Any front wheel drive, compact car with three or four cylinder engine. All cars must remain strictly OEM. Must be unaltered OEM-appearing body. No convertibles or two seat sports cars allowed. Maximum wheelbase 105 inches. OEM steel unaltered floor pan only. Inner fenders may not be removed. Hood and trunk lid/hatch must be securely fastened. All doors must be securely welded or bolted. All glass, exterior lights, chrome/plastic trim and hood insulation must be removed. Dash may be removed, but can remain. Bumpers must be welded, chained or cabled to frame and have front and rear tow hook. OEM bumper covers must remain.
    3. ROLL CAGE: Six-point roll cage required. Must use minimum 1.50-inch O.D. and .095-inch wall thickness tubing. Rear hoop must have “X” bracing configuration. Rear kickers required. Must have 1.25-inch minimum O.D. cross bar in top halo. Cage must be electric welded. No iron, galvanized pipe or fittings, square tubing, brazing or soldering allowed.
    4. DOOR BARS: Minimum three horizontal door bars on driver side and two horizontal door bars on passenger side. Both sides must have vertical bracing from top to bottom door bars. All tubing must be minimum 1.50-inch O.D. and .095 inch wall thickness.
    5. DRIVER COMPARTMENT: Minimum three windshield bars and protective screen mounted in front of driver. Aluminum high-back racing seat required. Must be securely mounted using 0.375-inch bolts. Driver must be sealed off from track, engine, transmission and fuel cell/tank. No mirrors. No gutting allowed except for roll/door bar clearance. All flammable material, radio and air bags must be removed. Front and rear firewalls must remain and have no holes. Interior must remain open.
    6. SUSPENSION AND STEERING: All components and mounts must be unaltered, OEM and match year, make and model of car used. No weight jacks, modifications, racing components, aftermarket or homemade tractions devices allowed. Rear wheels must track straight ahead and be in alignment with front wheels. No more than 5 degrees camber on any wheel. No center steering. Quick release steering wheel is allowed, must maintain OEM column. No remote reservoir power steering.
    7. SPRINGS/SHOCKS/STRUTS: All shocks and struts must remain OEM, in OEM location. One spring rubber allowed in each spring.
    8. TIRES AND WHEELS: OEM DOT 13, 14, 15 or 16-inch passenger tires only. No racing, mud or snow tires. No re-caps, softening, conditioning, siping or grooving allowed. Must be OEM steel or aluminum wheels, with standard bead bump and maximum seven inch width. All four tires and wheels must be the same series, size and offset. Tires must be inside of body. No wheel spacers or bleeder valves. Reinforcing of wheels recommended. Must use one inch O.D. steel lug nuts.
    9. BRAKES: Must be steel, unaltered, OEM operative, four wheel disc or drum brakes, and match year, make and model of car used. OEM master cylinder only, in OEM location. No brake shut off or bias adjuster. Steel brake lines only.
    10. EXHAUST: Exhaust manifold must be unaltered, OEM for year, make and model of car used. Smog pump, catalytic converter and air conditioning compressor may be removed. Track may require mufflers (IMCA recommended).
    11. WEIGHT: No ballast (extra weight) of any kind allowed. Any item deemed as ballast will be required to be fixed.
    12. BATTERY/STARTER: One 12-volt battery only. Must be securely mounted with positive terminal covered. OEM starter only, must be in OEM location. Car must start without being pushed or pulled from initial staging area or go to rear of that race.
    13. GAUGES/ELECTRONICS: 12 volt ignition system only. No ignition boxes. No performance chips. All ignition components must be unaltered, OEM and match year, make and model of car used.
    14. FUEL SYSTEM: Must have complete, unaltered, OEM fuel system for year, make and model of car used. Gasoline only, maximum 93 octane. No performance additives. Gas tanks ahead of rear axle allowed but must install shield under it. Gas tanks behind rear axle must be replaced with maximum eight gallon fuel cell and relocated to trunk area. Must be securely mounted using two, .125-inch thick, solid steel straps, two inches wide, completely around cell. Metal firewall must be between driver and cell. Fuel cell vent, including cap vent, must have check valve. No cool cans. Fuel lines through driver compartment must be steel.
    15. TRANSMISSION: Must use OEM, unaltered transmission that came in year, make and model of car used. All forward and reverse gears must be operational. Flywheel, flexplate, clutch assembly and torque converter must be unaltered, OEM for year, make and model of car used. No mini clutches or couplers. Must have inspection hole in bell housing. No transmission coolers in driver compartment. No torque dividing final drive.
    16. ENGINE COMPARTMENT: Engine and radiator must be OEM, in OEM location for year, make and model of car used. May use solid engine mounts or safety chains. No accumulators/accusumps. No reinforcing except installation of front strut crossbar.
    17. ENGINE: 3 or 4 cylinder in-line engines only. All engine components must be OEM unaltered for year, make and model of car used. Must use OEM crank, rods, valve sizes, stroke, etc. No aftermarket racing heads. No high performance or sports car engines of any kind. No turbo charged, super charged, rotary engines, or engines utilizing variable cam-timing.
    18. VEHICLE IDENTIFICATION NUMBER (V.I.N.): The V.I.N. must remain in the OEM location. It must be clearly visible and unaltered in any way. Any car missing the V.I.N. will not be allowed to compete.
    19. CAR CLAIM: Follow engine claim requirements and procedures in official IMCA rule book.
    (A) $1500 cash claim or exchange on complete car.
    (B) Claim does not include – 1. racing seat, 2. safety belts, 3. fuel cell (if equipped).

    AMENDMENTS TO THESE RULES MAY BE MADE AT ANY TIME IF CERTAIN TYPES OF CARS ARE DOMINATING.

    For more information, call IMCA at 319-472-2201.
    Copyright © 2007 IMCA All rights reserved.
    No part of this publication may be reproduced, stored, or transmitted in any form, without prior written permission.
    0 0

    Back to Group  

    Download Drive Magazine Now!

    Advertisements

        Special Offers & Deals

    Advertisement

     

    Cars > Clubs > Lincoln Nights > Forums

    Print your passion at Motortopia.com (http://www.motortopia.com)