Archive for the ‘New Products’ Category

New Hood Pins from Ron Mangus Interiors

Friday, March 2nd, 2012

Tired of the traditional style of hood pins that rust, or lanyards that scratch the paint?

The Next Generation of Hood Pin Technology!

With just a push of a button, the hood is unlatched.  The button stays in the down position until re-latched, and then the button pops back up.  No more pins to keep up with!

Includes all installation hardware; for simple installation with basic tools.

Quik-Latch “Mini” is a multi-purpose quick release latch.

They are much smaller than the hood pins, but larger than a quarter.  They are 1 ¼ inch in diameter.

They can be used as fasteners on cars and air cleaners; on RV and boat cabinets.

The possibilities’ are endless!

 

Contact Information:

www.ronmangusinteriors.com

(909) 877-9342

(909) 877-1741 fax

Email: ronmangusinteriors@gmail.com

Pure Choice Motorsports A/C Tight 90 degree Elbows

Friday, March 2nd, 2012

PURE Choice Motorsports is proud to introduce its NEW designed  A/C Tight 90 degree Elbows, these are the tightest elbow available today for 134A air conditioning applications where space is at a premium. Made from aluminum material in America. These Elbows are available in 3 sizes -6, -8 & -10, Part numbers 15150, 15160 & 15170. For more information contact one of our Dealers near you, visit our website www.purechoicemotorsports.com or call us at 1888-505-8355.

Coffin Muffler®

Friday, March 2nd, 2012

The Coffin Muffler® is a very versatile and extremely effective product. Not only does it fit in almost any automobile application, it will fit pickups, tractors and nearly any other application you can dream up. It also works well with diesels, both cars and pickups.

The inside design of the coffin muffler allows engines to make more torque and more horsepower, yet still increasing fuel economy-all at the same time. the muffler is able to do this by freeing up the OEM (Original Equipment Manufactured), exhaust system. Basically it’s like the difference between blowing through a plastic straw and blowing through a garden hose; which one do you think allows air to escape faster and with less effort? All this results in longer engine life, snappier throttle responds, better fuel economy, and yes that aggressive sound we all love. A lot of people turn their heads on such products, until they hear about better fuel economy, in other words, saving money, gas, and the environment, everyone can do their part! The Coffin Muffler is a simple and affordable product almost anyone can reap benifits from.

Contact Coffin at 559-635-2001.

OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA

“Top Hat Tele” Telescoping Tilt Column from Flaming River

Thursday, February 2nd, 2012

This new Telescoping Tilt Column enables 1” of column adjustability by simply moving the steering wheel towards or away from the driver. A spring loaded-design utilizes a billet lever for smooth and easy adjustment for driver comfort and clearance. The styling is based on the early Corvette steering column – sleek and streamlined with 2” diameter stainless tubing.

  • Comes in standard 30” or 32” lengths, or other lengths available through our custom manufacturing program
  • Available in Paintable Mill, Black Powdercoat and Polished Stainless finishes
  • 3 year/36,000 mile warranty
  • Made in the USA

For more information visit www.flamingriver.com or call 800-648-8022.

Top Hat Tele Extended V2 Top Hat Tele Collapsed V2

625 Street Demon Carburetor Makes Debut

Thursday, February 2nd, 2012

The introduction of an all-new carburetor, especially in this millennium, has become increasingly rare. But Demon Carburetion has done just that. Named the 625 Street Demon, it is engineered for hot rods with stock to mildly modified engines.
In appearance, its cast aluminum construction exhibits smooth and flowing contours and in operation it accommodates either square- or spread-bore-pattern intake manifolds without adapters. It’s an easy replacement for any street four-barrel.
Developed from clean-sheet beginnings, the Street Demon features two potent 1-3/8in primary throttle bores, which contain triple-stack boost venturii. Two of the boosters are suspended across the bores in the conventional way; the third is neatly integrated into the throttle bore walls. Their purpose is calculated to produce superior fuel emulsification, to present crisp throttle response and drivability, and to provide pleasing fuel economy.
At the top of secondary bores a torsion spring-controlled air valve resides. Its function is to ensure seamless primary-to-secondary throttle response, regardless of the throttle opening rate. Its two distinctive, sloping contours are engineered for efficient cylinder-to-cylinder fuel distribution. Torsion spring adjustment of the valve is controlled by a screw on the end of its shaft axis.
At the bottom of the secondary bores a goggle valve (GVS™) resides. This innovative device delivers over twice the air flow of the primary bores, with an effect that can be both felt and heard.
The Street Demon’s fuel bowl, which is integrated with the main body, is available in either aluminum or an exclusive automotive-spec polymer. The polymer bowl demonstrates impressive hot-weather drivability and faster hot restarts by reducing heat transfer to the fuel by as much as 20 degrees Fahrenheit. To eliminate all potential leaks the bowl is devoid of plugged passages and the bowl gasket is placed above the fuel level.
A single fuel inlet ensures simple installation and two-stage metering rods accommodate most tuning requirements, without carburetor disassembly or removal. For cold starting, a proven electric-assist bimetal coil choke is provided.
Street Demons are available in three forms: all aluminum tumble-burnished, tumble-burnished with polymer fuel bowl, and all aluminum hand polished. Prices are $349.99, $379.99 and $449.99 respectively.

For further information contact:
Demon Carburetion

TripleStack-web GoggleThrottlePlate-web StreetDemon_blk-web StreetDemon_HndPolished

New Products

Friday, November 11th, 2011

E-Brake Kit for Ford Rears From Wintec

E-Brake Kit for Ford Rears From Wintec

Wintec Fabrication has released a bolt-on emergency/parking brake kit that’s extremely street rod friendly for 8- and 9-inch Ford rears. It’s an easy way to incorporate an E-brake if your rear brakes are not equipped with that ability.

The easy-to-install kit includes the caliper mounting bracket, caliper and pads, 8 ¾-inch-diameter rotor with mounting hardware, high strength U-joint girdles, an 8-foot cable kit that can be trimmed and a chrome, floor-mounted handle. (more…)

New Products

Friday, October 21st, 2011

Justice Brothers Gas Treatment Protects Against Ethanol Damage

In 2010, the EPA allowed gasoline manufacturers to blend 15 percent ethanol (E15) into gas to be used by late model cars. Ethanol is basically a mixture of ethyl and alcohol. The main problem with this type of blended gasoline is that the ethanol mixture will separate from the gasoline over time, causing a moisture buildup (water) in the fuel tank. The presence of water can result in corrosion, resin/gum buildup, hard starting, reduced performance and possibly internal engine damage. (more…)

Stuff You Gotta Have!

Wednesday, October 5th, 2011

California Performance Transmission 200R4 Cast Pan

California Performance Transmission is happy to introduce its new 2004R cast aluminum finned pan with a drain plug. Available in standard depth or the deep version designed for high output applications with more clearance, as it’s about 2 inches deeper and holds 2 extra quarts of transmission fluid. In addition to the standard cast aluminum finish, the pan is available in black powder coat or polished aluminum finish for an additional charge. These pans are the perfect choice to go with the company’s 9- or 10-inch 200R4 converter. With stall speed from 2400 to 4,000-rpm, the converters will handle up to 1,000 hp, making these pans the perfect addition to keep your transmission running cooler and longer.

California Performance Transmission / 800.278.2277 (more…)

Muscle Car Parts

Monday, August 8th, 2011


Dual Friction Clutches for 2011 Mustangs

The dual friction and DFX Series of clutches by Centerforce, both high-performance single-disc clutches, are now available for ‘11 Ford Mustangs with the 5.0L 32-valve engines and six-speed transmissions.  Each of these new clutch assemblies replaces the current assembly with a higher holding capacity pressure plate designed as a direct bolt-in replacement. Note: The DFX clutch assembly requires a Centerforce flywheel. (more…)

Stuff You Gotta Have!

Wednesday, June 8th, 2011

CLASSIC PERFORMANCE PRODUCTS

CPP’s new nickel-plated U-joints are CNC machined and precision broached for a perfect fit. Stainless steel sealed bearing cap and nickel plating gives a polished, stainless look. It works up to a 30-degree angle. All popular sizes are available. (more…)