Motortopia: Where your passion parks.

Motortopia > Muscle Car Power > TECH > Installing a Spectre ProFab Cold Air Intake on a Camaro Street Machine > MCP-1010-Clean-16

 

Advertisement

Advertisement

Advertisement


Installing a Spectre ProFab Cold Air Intake on a Camaro Street Machine » MCP-1010-Clean-16

The passenger side installation process is the same. Bolt in the heat shield, then install the intake tube and top it with the hpR filter. On this particular car, the customer relocated his battery to the trunk so we had room for a dual-snorkel intake. If the battery were still in the stock location, we could have used a Sidewinder intake, which only has one tube.

The passenger side installation process is the same. Bolt in the heat shield, then install the intake tube and top it with the hpR filter. On this particular car, the customer relocated his battery to the trunk so we had room for a dual-snorkel intake. If the battery were still in the stock location, we could have used a Sidewinder intake, which only has one tube.


Leave a Comment

You must be logged in to post a comment.