Motortopia: Where your passion parks.

Motortopia > Muscle Car Power > TECH > Installing high tech gauges in a late model Mustang > MCP-0903-gauge-7B

 

Advertisement

Advertisement

Advertisement

Installing high tech gauges in a late model Mustang » MCP-0903-gauge-7B

Find a good vacuum source off of the intake manifold and install the supplied T-fitting. Install with the brass fitting going towards the gauge. If there is a fitting on the supercharger or intake manifold to hook up an additional line, the T-fitting must be capped and installed inline with the gauge.

Find a good vacuum source off of the intake manifold and install the supplied T-fitting. Install with the brass fitting going towards the gauge. If there is a fitting on the supercharger or intake manifold to hook up an additional line, the T-fitting must be capped and installed inline with the gauge.

Find a good vacuum source off of the intake manifold and install the supplied T-fitting. Install with the brass fitting going towards the gauge. If there is a fitting on the supercharger or intake manifold to hook up an additional line, the T-fitting must be capped and installed inline with the gauge.
Find a good vacuum source off of the intake manifold and install the supplied T-fitting. Install with the brass fitting going towards the gauge. If there is a fitting on the supercharger or intake manifold to hook up an additional line, the T-fitting must be capped and installed inline with the gauge.

This entry was posted on Wednesday, June 9th, 2010 at 9:58 pm and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Comment

You must be logged in to post a comment.