Motortopia: Where your passion parks.

Motortopia > Muscle Car Power > TECH > Rear Seat Pans installation on the “Muscle Car TV” ’61 Chevy – Red Sled > MCP-0901-red-3

 

Advertisement

Advertisement

Advertisement

Rear Seat Pans installation on the “Muscle Car TV” ’61 Chevy – Red Sled » MCP-0901-red-3

With the welding done and the piece ground smooth, holes are drilled in the locations where the pan will be plug-welded into place.

With the welding done and the piece ground smooth, holes are drilled in the locations where the pan will be plug-welded into place.

The remaining piece, where it meets the modified panel, is then tapped down to meet with the other half of the section that was removed. They were then welded together.
With the welding done and the piece ground smooth, holes are drilled in the locations where the pan will be plug-welded into place.

This entry was posted on Wednesday, June 9th, 2010 at 7:28 pm and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Comment

You must be logged in to post a comment.