Motortopia: Where your passion parks.

Motortopia > Muscle Car Power > TECH > Retrofitting a VDO Tach Into a Vintage Mustang > MCP-WOR-1103-TACH-PIX-03

 

Advertisement

Advertisement

Advertisement


Retrofitting a VDO Tach Into a Vintage Mustang » MCP-WOR-1103-TACH-PIX-03

Held in with rivets, the stock “bridge” is removed from the face by driving the rivets out using a hammer and punch. This job is done as gently as possible because too much hammering can cause damage to the thin metal.

Held in with rivets, the stock “bridge” is removed from the face by driving the rivets out using a hammer and punch. This job is done as gently as possible because too much hammering can cause damage to the thin metal.


Leave a Comment

You must be logged in to post a comment.