1976 Chevy Monza Pro Street car. I actually did not own it but wish I had. I didi however get to drive it for a friend.
bought the car 4 years ago for 800 bucks,dealer stated it needed a fuel pump when alls it needed was a ign module
12.2@112mph witht he 60-1 turbo at 9 psi
3 new videos added
first up installed a new t3/60-1 garrett turbo
CAR WAS ON THE DYNO FOR THE FIRST TIME
had a few issues but put done some really good numbers
first issue was the ignition timming would not advance so it was locked at 8* btdc
second issue was it would not rev up over 5,100-5,300 rpms
with the 268/272 cam the power should really come in right around 5,600 and on the dyno it looke dlike it was going to but once it hit 4,800 rpms it just nosed over
even still the car put down
272RWHP AND AN AMAZING 376FTLBS @ only 9psi
i have no plans to redyno the car as im sure its making more then enough power even at low boost now thats its fixed to push me into the high 11's
383 SB Chevy with Dart Pro 1 heads, Victor Jr intake, Forged steel crank, 12.5 to 1 compression, headers, Demon 1090 CFM King Demon RS carb, Nos Cheater system, Glide with a transbrake, 9" ford rearend, big fatty tires, and custom paint and body work.
Ran 11.38 off the NOS and 9.30's on a 200 shot of spray
the car has recently just gone email@example.com @ only 9 psi
though after reviewing the data logs form the run i have maxed out the 36.6 pound injectors and the car went dead lean for the last 3-400 ft of the track
on the way are some 65# injectors a methonal injection kit and a larger turbo to replace the small t3/t4 i have been running
the hybrid turbo i have been running is only good for 425 crank hp and i should be putting down about 390 crank as the car sits on 9 psi
(9 psi on the 60-1 turbo got me down to a 12.2@112 mph
Sick old V6 and metric 250 automatic transmission. Little rearend with crappy gears.
No factory options listed.
NOS, 383 Stroker motor, MSD ignition, Ford 9" rearend narowed, roll cage, 2 speed Powerglide transmission with a transbrake, TCI convertor, aluminum radiator, custom mixed blue paint and body work.
under the hood resides a factory 2.8L V6
specs on the motor are
stock crank and rods with arp rod bolts
Keith black hyper pistons with coated skirts std bore
the entire rotating aseembly was lightened and balanced to 7,500+ rpms
custom 268/272 on 115 lsa camshaft
the heads have been worked over by myself which include cnced bowls and porting and larger valves
ported stock manifold
custom hand made turbo headers made from 316L and 321 stainless
t3/t4 hybrid turbo
and a full 3 inch downpipe and ex system
the stock ecm was swaped out for a megasquirt standalone system
the transmission is a stock piece with a tci street fighter rebuild kit and a tci super street fighter 9 inch converter restalled to 4,500 rpms
stock 10 bolt 7.5 rear with 4:10's and a spool
+ lots more
MonzterRacing has no Car photo albums.
|Points for Blue Bunny||Total Votes||Points for Project Boost|