Topic: help with combo

  • 0 forums with topics and posts

  • Page 1 of 1:
  • 1
  • Posts 1 – 2 of 2
  • luvmy383monte’s Profile Photo
    luvmy383monte
    #1
    Feb 15, 2009 at 2:22 am
    I have a 87 monte, right now I have it down to the frame with the front clip, doors trunk and intire interior removed I have a 327 and a th350 with a b&m shift kit in the car right now. I was hoping to rebuilt the 327 but i'm stuck on a combo. I was running a air gap performer, a remaned set of 882 head and for a cam I was using a isky cam. I think I was around maybe 350 to 400 ft lb of torque and maybe the same for hp. What I'm looking for is about 450 to 500 ft lb of torque I can live without the hp if I can get the torque I want. I'm a street guy and that is where I love to run, the track is fine but no plans right now of making that jump. So if any one can help thank very much.

     


  • MonzterRacing’s Profile Photo
    MonzterRacing
    #2
    Feb 20, 2009 at 5:58 am
    Give me a list of parts you already have and I can help you out with a program I have. Works pretty good. I need to know what type of cam (hyd, solid, roller, etc...) , lift, compression, valve size (1.94/2.02), exhaust, bore and stroke, length of rods, carb size, etc... Then I can have a starting point to make changes etc...

     

    Monzter was here!! Click on this photo to go directly to my challenges and vote on them Please.



    Mark Francis @ Monzter Racing Happiness is the smell of 116 octane race fuel with raspberry additive.

  • Page 1 of 1:
  • 1
  • Posts 1 – 2 of 2