Flywheel401’s Profile Photo


Mercersburg, Pennsylvania
United States

ReachDan’s Profile Photo


Tucson, Arizona
United States


1971 AMC 401 AMX/Javelin

“The 401 Experience”

1966 Chevrolet Chevelle SS396

“The Green Machine”

Photo of: 1971 AMC 401  AMX/Javelin
Photo of: 1966 Chevrolet Chevelle

Head to Head


About “The 401 Experience”

Rare : Early 71 AMX 401 "Z" Code

Shares in a Racing Heritage. In 71' & 72'

The Trans Am /AMX's ,Won the Manufactures Cup &

Championship Title in SCCA Trans Am Road Racing .

71' Season - Won 7 out of the 9 Races . In 72' Season

finished 1st , 2nd and 3rd. in last race of season !

Some of the designers of the 71 AMX Roger Penske,

Mark Donohue , Chuck Mashigan, ,George Follmer

just to name a few. 71' is the Frist Year for the 401engine.

It is a split year for this model,

Only 745 - AMC - 71' - 401 AMX's were produced ,

unknown # of 4 spd made

unknown # of Early 71' 401's made

About “The Green Machine”

This is a one-owner car and was purchased new in October 1965 from Cochran & Celli Chevrolet in Oakland California. I took delivery of it in December of the same year. It still has the original numbers-matching Big Block 396 in it.

It was my family car for a lot of years and towed my 1975 18' Kona Jet Drive (455 Olds powered) ski boat all over Northern California.

It was stolen in 1968 and found several days later with the Muncie 4-speed missing. It was found only a handfull of miles from my home which is where the car was stolen from and everything else was intact.

In 1969 the car had an engine fire when the tap plug of the Rochester Quadrajet carburetor fell out and gasoline was pumped onto the very hot intake manifold. Cochran & Celli Chevrolet in Oakland, California had the pleasure of putting the car back together after that little pyrotechnic event.

I moved to Arizona In 1985 and while the car was in storage it was broken into and the engine was stripped of most of the bolt-on stuff like valve covers, coil, distributor and a brand new 750 double-pump Holley carburetor.

The car sat in that condition for the next 20+ years and in October of 2005 it was loaded onto a truck and taken to Wild West Rods & Custom here in Tucson, Arizona where it spent the next 13 months undergoing a complete frame-off restoration.

The entire Chassis including A-frames, sway bars and traction bars have been black powder-coated as have the underhood parts like the radiator mounts and the inside wheel well covers.

A photo journal of the car's restoration can been seen at


Specs for “The 401 Experience”

ENGINE : 401 - 0.030 over . Keith Black Custom Performance

Pistons w/ Thermal Conductive Ring, Chrome Moly Rings.

The 401 RODS, have been reconditioned Bushed for full floating

pins,with spiral locks. Mildon Bolts & Nuts installed.

The MAINS, have Mildon Studs & Nuts Installed

CRANKSHAFT: Has been Magged, Crossdrilled, Chamfered,

Nitrided & Polished. The assembly has been completely

Balanced Externally Front to Rear. The DECK has been O-

RINGED ( Stainless Steel). New Main,Rod, & Cam Bearings

installed. Hi-Perf. Camshaft 474 Lift - 288 Dur. New Guides,

Hi-Perf. Valve Job, Comp Cam Springs, 10 degree retainers &

locks. Intake is an AMC Elderbrok Torker II with a 4150 series

Holley.A Centerforce II Clutch assembly gets the Horses too

the factory 4.10's Assembled and installed 4/07 FRESH

Run's Like a Cat with it's Tail on FIRE !

Specs for “The Green Machine”

Originally an L34 Big Block 396 with 325 HP it is now almost a clone of the L78 396 with 375+ HP. A dyno-tune measuring HP at rear wheels will likely up this figure closer to 425 HP.

The heads have been ported and polished and the pistons shaved to reduce compression from 10.25 x 1 to about 9.5 x 1 to burn premium pump gas.

An Edelbrock 750 cfm Performer Series Carburetor sits atop an Edelbrock Performer 2-0 Aluminum Manifold with Edelbrock's Enduroshine finish.

A full roller hydraulic cam with all roller lifters replaces the stock hydraulic flat tappet lifter cam and gives it a nice loping idle sound.

Exhaust flows through the stock cast iron exhaust manifolds into 2 1/4 inch stainless steel and exits through a set of Flowmaster mufflers.

ECI Distributor provides the spark and an after-market wiring harness with up-to-date fuse plugs carries juice to wherever it is needed.

A 12-Bolt 3.73 Posi Rear completes the package for now...


Factory Options for “The 401 Experience”

Ealy 401 AMX " Z " Code

" GO - PACKAGE " T - 10 P 4 Speed w/ Hurst Comp Plus

Shifter, Twin Grip Locking Differential w/ Factory 4.10's

Front & Rear Spoilers, Functional Cowl - Air Induction Hood

Handling Package- HD Springs & Shocks, Heavy Duty Cooling

System, Hood T - Stripe, 15"x7" Factory Slots Style Wheels

Air Conditioning, Power Steering ( Eaton Pump ), Power Disc

Brakes, Light Group, Tinted Windows, Rally - Pac Instruments

w/ 140 Speedometer , Leather Front Bucket Seats, Extended

Console w/ Armrest, HD Front Anti-Roll Bar.

Dealersip option : Trendsetter Sidewinder Exhaust

Factory Options for “The Green Machine”

Factory options on this car included front bucket seats with console, tinted glass, retractable seat belts, push-button AM radio and Muncie M20 four speed trannie and positraction rear-end. Pretty basic.

The build sheet and original purchase order comprise some of the original documentation for this car along with registration certificates from 1965 thru the last ;year it was registered in California, 1984. The next time it was registered was after its restoration completion in 2006.


Mods for “The 401 Experience”

Hooker Headers,

Traction Bars,

Paint :Custom Red & Copper

Mods for “The Green Machine”

Besides those engine modifications listed above, the car runs on a set of BF Goodrich Radial T/A's mounted on an original set of American Racing's All Aluminum 200S "Daisy" Mags purchased from BIG O Tires in Oakland, California in 1969.

The wheels have since been refurbished and brought to better-than-new condition by NU WHEEL, a Tucson, Arizona company that specializes in the repair and refinishing of aluminum wheels to factory finish.

The paint is the original color, Willow Green, paint code HH and is done in a 3-stage base coat, clear coat finish that is absolutely stunning! Paint was done by Larry Barrus of Metal Masters Restorations here in Tucson.

After-market Vintage Air Conditioning was added that operates from the stock heater control knobs and cools the passenger compartment thru duct vents attached under the dash. No cutting was done to the dash to install AC vents.

A Tremec T500 5-speed transmission with overdrive pretty much completes the modifications on this car.

Besides some cosmetic upgrades, future modifications include Disc Brakes (upgrqade from current stock 9 1/2 in 4 wheel drum brake system), Secret Audio Sound System, Tilt-Telescoping Steering Wheel, Power Windows & Keyless Remote Entry and quite possibly a ProCharger or Vortech Supercharger or 'Huffer' system to boost HP a bit :)


Photo Albums 1 – 2 of 2


Previous Photo Albums Next Photo Albums

Photo Albums 1 – 2 of 3


Previous Photo Albums Next Albums


Vote This challenge has ended!

Points for The 401 Experience Total Votes Points for The Green Machine
56 26 74


Comments on this challenge 1 – 11 of 11

Log in to post comments.

Read comments on this challenge (1 – 11 of 11)

Log in to view challenge comments.