mr_bill’s Profile Photo


Saint Petersburg, Florida
United States

FordFanboi’s Profile Photo


Austin, Texas
United States


1966 Corvette Sting Ray coupe customized


1966 Ford Mustang


Photo of: 1966 Corvette Sting Ray coupe
Photo of: 1966 Ford Mustang

Head to Head


About “Tit's”

i cannot take credit for building the car, only owning it. I am the 4th owner, i bought it from a best friend who could no longer drive it due to a foot amputation. He bought himself a 2004 SSR with an automatic with the cash i paid him. He bought the car in 76' from the 2nd owner who had the body modified in a shop in lancaster ny (my home town). The 2nd owner had it done in 72'. My friend the 3rd owner took very good care of the car while he owned it, changed the paint every 6-7 yrs just for grins. He never drove the car in rain (no wipers) and it stayed stored mostly till summers in western ny, and came out on weekends. He couldn't keep the car when he lost his foot, and could not give it to his children as he had 2, and couldn't split the car in half, so selling it to me was the agreed upon answer he and his kids came up with as they considered me like family. i bought it in june 04'. Sadly, my friend passed away last yr in may 06'.

About “Coupevertible”

Custom Hardtop / Softtop Conversion
408ci Stroker, Megasquirt EFI w/Holley 900cfm Throttle Body Injection, Unisteer Power Rack & Pinion Steering, TCP tubular coil-over suspension, Richmond 5 Speed, Mark Williams 35 Spline Rearend

Originally a pale yellow 289ci automatic coupe.

I cut off the original hardtop and can either bolt it back on, install the custom vinyl top, or have her go topless.

VIDEO: Flyin over the camera
VIDEO: 3 shift burnout
VIDEO: Autocross racing


Specs for “Tit's”

Talbot mirrors, rounded flared wheel wells, rounded raised tail, front bumpers removed, front parking lamps shaved off, flush grand prix door handles, Hooker headers & sidepipes, original numbers match sb 327 bored .02 over, performance cam, mallory ignition, magnesium wheels, 67' bb stinger hood, stainless steel brakes,aprox 60k miles.

Specs for “Coupevertible”

Dyno 06/2013: 425 RWHP / 408 RWTQ
1/4 mile 06/2005: 12.34 @ 116mph / 2.08 60' ( All weather radials )
Dry weight: 2900lbs


Factory Options for “Tit's”

No factory options listed.

Factory Options for “Coupevertible”

Front disc brakes
289ci engine


Mods for “Tit's”

No modifications listed.

Mods for “Coupevertible”

General information:

Solar Yellow with Matte black LeMans stripes
Custom hardtop/softtop conversion
Scat 408w stroker ( 351 windsor block )
Holley COMMANDER 950 900cfm TBI ( 534-173 )
4 85pph Injectors - low impedance 1.4 ohms ( 522-43 )
MegaSquirt II ECU
Richmond 5 speed transmission
Mark Williams 35 spline spool and axles
Nodular 3rd member with 3.00:1 gears
Unisteer Power Rack & Pinion steering
TCP coilover front suspension

Interior Details:

Interior: Black upholstery / carpet
Gauges: Classic instruments Autocross instrument cluster
Gauges: Innovate XD16 Wideband o2
Roll Bar: Custom 6 point
Seat: Scat Classic 1500
Harness: 3 point conversion
Steering Wheel: Aftermarket

Exterior Details:

Exterior paint: Nissan Solar Yellow with gloss Black stripes
Fiberglass: Shelby racing apron, Shelby side scoops, Eleanor hood, Chin spoiler, 3.25" flared front fenders, 3.5" rear fender flares, Decklid with spoiler
Top: Custom vinyl softtop
Misc: Shelby style foglamp kit

Performance Details:

408ci Engine Details:
Cubic Inches: 408 (stroked 351W)
Compression: 10.7:1
Crankshaft: SCAT 9000 series
Bore: 4.030
Stroke: 4.00
Rods: SCAT Forged H Beam 6.2"
Pistons: Probe Forged 19.3cc dish
Timing Chain: Edelbrock Double Roller
Oil Pan: Milodon 8qt.
Crank Dampner: Summit SFI
Motor Mounts: Prothane urethane

Cylinder Head Details:
Brand & Model: Air Flow Research AFR205
Valves: 2.08 / 1.60
Port Work: CNC ported and polished
Components: Air Flow Research valvesprings
Rockers: Crane Gold 1.6 Roller 3/8 stud ( 974D ) Summit 1.72

Camshaft Details:
Brand & Model: Crower 15445
Duration adv int/exh (0.050 int/exh): 285/292 (254/260)
Gross lift int/exh: 0.642/0.578 (1.72/1.6 rockers)
Lobe Separation: 106
Cam advance/retard: Straight up
Lash: .022" intake and .024" exhaust
Lifters: Crower mechanical roller

Induction System Details:
Intake: Edelbrock Victor Jr 351W
Port Work: Matched
TBI: Holley 900cfm throttle body w/quad 85pph injectors
AFR: LC-1 Wideband O2 kit
Fuel Pump: NAPA inline
Air Filter: K&N 14x4

Exhaust System Details:
Hedders: Hedman Shorty 351W Swap
Pipe Diameter: 3"
X-Pipe: Pypes
Mufflers: Magnaflow
Tailpipes: Custom over axle with mufflers at rear bumper

Ignition Details:
Distributor: Mallory Unilite with HEI conversion cap
Ignition: Mallory HyFIRE IVc
Coil: MSD Blaster HVC-II
Wires: Ford Motorsport 9mm plug wires
Plugs: Autolite 3924 or NGK V Power Spark Plug (BKR7E-11)
ECU: MegaSquirt II v3.0

Cooling Details:
Radiator: AFCO Racing alum. 19x26x3
Fan: Perma-Cool 18" 2950cfm electric with thermal controller
Water Pump: Moroso aluminum high flow
Temp sender: GM 25036135

Drivetrain Details:
Transmission: Richmond aluminum 5 speed (RMG-7041710A)
Gear ratios: 3.28, 2.13, 1.57, 1.24, 1.00:1
Flywheel: 13lb Zoom Aluminum (60-3101) w/ARP bolts
Pressure plate: McLeod 800 series 11" diaphram style (360850)
Clutch Setup: McLeod Alum / bronze 11" (260571)
Driveshaft: Shortened with 1350 U joints
Axle housing: 1/2 Ton Truck, narrowed
Axle flanges: Large bearing early Ford 3.5"x2.375" 3.150 dia
Axles: Mark Williams 35 spline
Carrier: Nodular Ford 9"
Differential: Mark Williams full spool
Gear Set: Superior Gear 3.00:1
Clutch Linkage: McLeod hydraulic throwout bearing with Wilwood master cylinder
Shifter: Hurst Drag Racing H pattern with custom adjustable shift handle (Hurst VGate in storage)
Miscellaneous: Hurst Roll Control Linelock
Alternator: PowerMaster 100a internally regulated

Audio/Video Details:
- RIP -

Steering/Suspension Details:

Steering: Unisteer Power Rack & Pinion
Front UCA: TCP Mark II tubular
Front LCA: CPP Mini subframe w/tubular LCAs
Springs Front: 600 lb/in TCP Coil-over with 2" drop plate
Springs Rear: 5 leaf reverse eye
Control Arms: Grab-A-Track (upper relocated 1" lower)
Front Antisway: 1"
Rear Antisway: 3/4"
Front Shocks: VariShock single adjustable
Rear Shocks: KYB Gas-A-Just
Bushings: All polyurethane
Subframe Connectors: Competition Engineering
Traction Devices: Underride Traction bars (welded)

Wheel Details:

Brakes front: 11" 4 piston disc ( '67 calipers )
Brakes rear: SSBC 10.5" 1 piston disc ( SUM-BK1327-X )
Master Cyl: Manual dual bowl for 4 wheel disc setup
Prop valve: Wilwood
Wheels: American Racing Torque Thrust II 17x11 ( 5.25" BS )
Tires: Nitto 555 275x40x17 / 315x35x17
Slicks: Mickey Thompson 10x26 r15

Hydraboost power brakes
Painless wiring kit
Rear coilover conversion
Tremec TKO


Photo Albums

mr_bill has no Car photo albums.

Photo Albums 1 – 2 of 17

Cover photo of 2017 album
Photos: 12
Cover photo of Gallery album
Photos: 30

Previous Photo Albums Next Albums


Vote This challenge has ended!

Points for Tit's Total Votes Points for Coupevertible
31 13 34


Comments on this challenge 1 – 7 of 7

Log in to post comments.

Read comments on this challenge (1 – 7 of 7)

Log in to view challenge comments.