viperf16’s Profile Photo


Lexington, North Carolina
United States


1986 Chevrolet Monte Carlo SS


1985 Chevrolet Monte Carlo SS


Photo of: 1986 Chevrolet Monte Carlo
Photo of: 1985 Chevrolet Monte Carlo

Head to Head



My dad bought the Monte new, in 1986. Nicknamed "RDKLXPRS" (Roadkill Express), because the is the license plate that was on the car while i grew up and hope to put it back on one day.

He and my mom went to the dealership one night to look at a new car. I'm not sure if he knew what he was going for. The dealership was already closed for the night. Before they closed that night they had received a car hauler in and hadn't unloaded the cars from it. The Monte was one of the cars on the car hauler. They went back the next morning and purchased the car before they even had a chance to take it off the truck. This is the very first car i ever rode in. It took me home from the hospital when i was born in 1990. So obviously me and this car have a lot of history together. I remember as a kid riding school in it and my dad driving it to work every other day. 180 miles at a time. (He and one of his friends with a camaro would take turns driving their cars to work.)

In 2003 the original 305 finally let go after 330,000 miles. My dad planned to sell it after that. It was on a street corner for a while with a for sale sign on it. After a while my mom rode by it one day and she decided to pull it off the corner paint it and put in a crate 350 and then she saved it for me. Its now my car with 376,000 miles on the body (not a typo, its good to see the jaw drop of whoever is putting the mileage in the computer for state registration). When its clean, it looks like it just came off the showroom floor. But being in school and in FL its hard to keep it clean. Its still running strong and i don't ever plan to get rid of it.

I live in NC, but go to school in Daytona Beach FL. So Monte travels back and forth 4 times a year. It was stolen from my school on Oct 9 '09, the police had already found it parked across the street at a high school when i was notified that it was gone. It already had a broken flywheel and flopped around when it was cold. I think this was the main reason the thieves ditched the car, and that it didnt make it to a chop shop, because they didn't think they would get very far. It wasn't in too bad of a condition, they didn't tear it up to bad. I got it back, replaced what they had messed up. I installed an alarm and its back in my possession and hope it doesn't leave again. Some pictures have my moms 2 Camaros in them.


1985 Chevrolet Monte Carlo SS

This was my first car, which I purchased in 1998. I had always loved the 4th generation Monte Carlo SS since I was a kid and when I had saved enough money to purchase my own car, this is what I focused on. The very car I own today slipped through my fingers a year before I bought it, as it couldn't be driven at the time I went to look at it. The seller was supposed to give me a call back when he got a battery for it and was able to get it started. A week went by without a call, so I called back to inquire if he had obtained a battery as of yet, and unfortunately the car had been sold. Due to a baby on the way and the purchase of a new home, the new owner happened to have it for sale again about a year later when I stumbled across it a second time in my ongoing search to find a "nice car at the right price". I didn't let it slip away the second time around.

The original L69 305HO spun a bearing at the beginning of the second summer I had it. Due to a lack of cash at the time, the car unfortunately had to sit for the season while I saved up for a new motor. A summer of hard work and penny pinching allowed me to purchase a new GM Goodwrench crate 350. The following spring, my father and I installed the new 350 and also replaced the 3-speed TH350 transmission that a previous owner had put in with a 200-4R, which is the 4-speed overdrive transmission the car would have originally came with. Wheels have been upgraded to the 86-88 SS aluminum variety that I sanded and polished by hand, then turned over to a local shop for the charcoal grey paint to be applied on the inserts. Tires are 245/60/15 BF Goodrich Radial T/A's on all four corners. Additional bracing has been added throughout the car to stiffen up the body, and the suspension has been upgraded with Belltech lowering springs and drop shocks resulting in an aggressive stance. Edelbrock TES headers connect to a factory Y-pipe with dual Dynomax Super Turbo mufflers and 3" polished stainless steel tailpipes. The original clutch fan has been replaced with a 5000cfm Mark VIII electric fan guided by a hand built harness utilizing both speeds as well as supplying feedback through a single RBG LED. As commonly found in g-bodies, the rear frame rails were in need of attention which was addressed by an aftermarket kit fabricated and installed by Conrad Lozier in Woodstock, Ontario.

The Trans Am Shaker was installed in the summer of 2004. I had bought the shaker scoop itself several years ago at an automotive flea market, but never had the courage to take on the project or hack up the original hood. When I had a spare hood in hand from a 1987 Monte Carlo SS parts car I had, I decided to give it a shot. The project went quite smoothly, and after a lot of measuring I had the complete shaker assembly installed in a few days - much quicker than I had originally anticipated. I also installed an aftermarket flap kit to make the scoop functional like the 70-72 shakers, as all 73+ T/A shakers were purely cosmetic. The installation is a mix and match of T/A parts that were customized to fit and sit properly with the Monte hood. The assembly sits on top of a modified dual snorkel SS breather, complete with ducts and snorkels from a 1984 Camaro. The result is a fairly unique, yet somewhat factory appearing shaker hood which really lets the CCC Q-jet roar with the secondaries and shaker flap open :)

In December of 2007, I once again upgraded the transmission to a World Class T5 5-speed from a 1992 Camaro using a 93-97 F-body hydraulic assembly complete with a custom clutch pedal made by member John Bzdel on the forum. A Hurst Competition Plus shifter, modified to fit the Monte console topped it off. Other recent projects include the installation of a serpentine belt system from a 1991 Caprice, a 36mm hollow sway bar from a WS6 Trans Am, as well as an H4 headlight upgrade. An 8.5" 3.42 limited slip rear end from a 1987 Grand National has also recently been purchased to replace the original 7.625" 3.73 open rear.

The Monte was my daily summer driver until 2004, but has now become a fair weather only car. Future plans hope to include true 2.5" stainless dual exhaust, a cam and head upgrade and then eventually a complete repaint. The car was originally black, and was painted white by the second owner. Colours that I have considered are silver or pewter with stock 85/86 stripes, but I'm also pondering going with a brighter white, burgundy, or perhaps going back to the original black. This car has been, and still is a pleasure to drive. The recent switch to a standard transmission really wakes the car up and makes for a completely different driving experience. G-bodies are really starting to come into their own, and it's nice to see others start to recognize these cars as a great platform to build on.


Specs for “RDKLXPRS”

Probably 250-260 HP

Specs for “SSHAKER”

-Goodwrench 350
-World Class T-5 5-speed
-8.5" 3.42 Grand National limited slip rear differential


Factory Options for “RDKLXPRS”


Factory Options for “SSHAKER”

-AM/FM radio
-buckets & console


Mods for “RDKLXPRS”

No Major mods just restoring and replacing worn out parts

Mods for “SSHAKER”

Modifications/repairs include:


Current Mods:
-World Class T5 5-speed c/w JohnB clutch pedal, 93-97 F-body hydraulics
-Hurst Competition Plus shifter (modified for g-body)
-Goodwrench 350 crate motor
-8.5" 3.42 Grand National Posi rear differential (in hand)
-Additional bracing: under rad support, rear bumper, rear seat, fender to rad support and rad x-braces
-36mm F-body front sway bar
-Refinished 86-88 SS wheels
-Dual snorkel air breather
-Polished 3" stainless steel tailpipes w/dynomax superturbos
-Mark VIII electric fan with hand built harness (see album below)
-TES shorty headers
-MSD coil
-Custom T/A shaker hood with functional flap kit
-3" front drop, 1.5" rear drop
-New aftermarket rear frame rails
-245/60/15 BFG Radial T/A's
-H4 Headlight upgrade
-serpentine belt conversion


Future plans:
-head & cam upgrade
-True dual stainless steel exhaust


Photo Albums 1 – 1 of 1


Previous Photo Albums Next Photo Albums

Photo Albums 1 – 2 of 5


Previous Photo Albums Next Albums


Vote This challenge has ended!

Points for RDKLXPRS Total Votes Points for SSHAKER
3 6 27


Comments on this challenge

Log in to post comments.

Read comments on this challenge

Log in to view challenge comments.