sgtchevy’s Profile Photo




1969 Chevrolet Camaro RS

“The NMC Machine”

1968 Chevrolet chevy 2 nova custome deluxe

“bumble bee”

Photo of: 1969 Chevrolet Camaro
Photo of: 1968 Chevrolet chevy 2 nova

Head to Head


About “The NMC Machine”

This is my '69 Camaro S/P bracket car. It has a sbc and it runs consistant 6.50's in the 1/8th & 10.30's in the 1/4. I gave it the Baldwin Phase III paint job last winter. The paint scheme/decals pay tribute to quite a few very popular first gen. Camaro's. Don't forget to check out the video!

About “bumble bee”

bought in 1985 from original owner and sold in 1997 bought back in 2000 and turned into a outlaw street car for NMCA 9 second class 1/4 mile have not run 1/8 mile yet should be fast
Has 33,000 original mile on it and all original sheet metal
and interior looks and smells new still stored inside almost all its life cig lighter has never been used and wing windows never opened.was butter nut yellow but repainted sun and bright yello installed 427 12 bolt and 400 in june of 1968 and have all paper work on car.full documentation even protecto plate.This is a true outlaw steet car,its a driver not a trailer queen.
500cid 12.50 -1 compression
merlin 2 heads worked over ported and polished
victor jr manifold also ported to match heads
1000 cfm drag race demon carb that has been tewaked just a little.ha ha
aeromotive fuel system,also have 300 shot pro fogger nitros kit not installed yet but dont need it at this point.not a nitros fan just got a good deal at a swap meet on it.
comp cams roller valve train
sorry cant give up exact engine specs.
2 1/4 primary tube headers coated
i do have 4 inch custom exhaust for the street that is also coated.
msd pro billet dist.and msd 7al box with coil w/ timming controlr.
fabricated brackets to fit chevelle radiator between frame rails and cut 4 inch out of rad support.radiator from becool and twin fans. 1 inch tubes
fairbanks turbo 400
custom built 5000 stall
b&m trans cooler
hurst pro pistol grip shifter
trans brake with manual shift reverse valvbody
hurst launch contol (line lock)for staging burnouts
moeser 12 bolt w/35 spline axles and billit spool
wilewood disc breaks on all 4 corners
5/8 studs
3.5 inch strange driveshaft chromemoly 1350 u joints and billit yokes front and rear
comp engineering sub frame connectors
cal tracs rear springs split mono
cal trac bars
29-10.50 m/t tires also have the street version
jegs pro street fuel cell and polished battery relocation kit in trunk.
front hotchkis springs 2 in drop and energy suspension bushings w stock conrtol arms ,it is a outlaw street car.maybe tubular later.
m/t sporsman 26.7.50- 15 tires up front
no chrome all parts are polished billit aluminum
4 inch steel cowl hood made by dynacorn i waited 4 years for this hood because i refused to go fiberglass and wanted one that fit perfect and it did it was woth the wait and i got thje very first one made for the 68 to 72 nova..i do still have the stock hood put away.


Specs for “The NMC Machine”

406 sbc
Dart Little M block
Cola Crank
Eagle H Beam Rods
SRP Sprint Car Pisons 14.8:1
Brodix Track One Heads
Comp Cams 678/698 Roller Cam
1.6 Harland Sharp Roller Rockers w/ Girdles
Brodix High Rise Intake
Holley 830 "Cheater" Carb
Hitman 50-400 Plate System (Not Used Yet)
Holley Black Fuel Pump
4.88 Spool
Dynoed 605hp at the crank, 490 at the wheels

Specs for “bumble bee”

500 cid 700 hp no bottle
fairbanks turbo 400 w/trans brake
5000 stall


Factory Options for “The NMC Machine”

All of the RS treatment is airbrushed on. Including the grille, headlights, side marker lights, & side vents. The entire car is finished in BC/CC. The reaer fender flares are hand fabricated and all metal.

Factory Options for “bumble bee”

has custom deluxe interior which is actualy the ss interior for 1969 nova ss


Mods for “The NMC Machine”

This has been a race car since the early '80's. There is pretty much nothing "stock" left at this point.

Mods for “bumble bee”

stroker kit
merlin 2 heads
1000 cfm drag race demon
sorry no engine specs list of internals due to it being in a NMCA class
moeser 12 bolt 35 spline axles billit spool and 4.56 gears
cal trac bars and spit mono single leaf springs
jegs fuel cell in trunk (sorry its the only thing i cut on the car but kept the piece to weld back in in case i go back to stock)


Photo Albums 1 – 1 of 1


Previous Photo Albums Next Photo Albums

Photo Albums 1 – 2 of 2

Cover photo of chevy2 album
Photos: 8
Cover photo of newest pics album
newest pics
Photos: 9

Previous Photo Albums Next Photo Albums


Vote This challenge has ended!

Points for The NMC Machine Total Votes Points for bumble bee
24 7 11


Comments on this challenge 1 – 2 of 2

Log in to post comments.

Read comments on this challenge (1 – 2 of 2)

Log in to view challenge comments.