Motortopia: Where your passion parks

Motortopia: Where your passion parks.

Why Join Motortopia? Connect with other enthusiasts... Chat! Add Friends! Challenge! Private Message!

  1. cars
  2. bikes
  3. boats
  4. planes

Cars > tingyuya’s Garage > Blog > Share my car electronics maintenance of common sense tips

 

tingyuya’s Profile Photo

tingyuya

M
Abernant, Alabama
United States

 

Advertisement

Share my car electronics maintenance of common sense tips

By tingyuya

??Share my car electronics maintenance of common sense tips
??Car electronics maintenance easy, said complex is actually also can let a person feel very troublesome. Many people know to keep the car in normal use, is going to do to him basic maintenance, only some small common sense is that they are easily overlooked, for example in the summer the rinse water body. The following have ibuonline for everyone to share electronic vehicle maintenance knowledge.
??Car electronics maintenance of common sense not to tire bolt nut
??At the wheel of a car repair, in order to prevent the wheel bolt and nut rusting, installation will create new styles bolt nut are coated with oil, but this approach is not only wrong, but it will bring the hidden danger to safety. Bolt and nut, mutual have self-locking characteristics. And oiled, two between the self-locking coefficient, self-locking performance. When an automobile runs at high speed, bolt and nut easy looseness and shedding, causing a traffic accident.
??Car electronics maintenance of common sense not to flush the body
??Because the summer temperature is high, many owners choose to wash with water body, with a clean rag, but the body is unable to use water to wash. Because the cab floor pads below is " the boundless plain ", structure of the need to make the cab floor pad below the groove, the through hole is very much. After washing with water, or deposited in the groove is not easy to dry, either from the through hole flow to the gearbox and other parts from corrosion. Especially good sealing performance cars cannot directly flushing water body. The correct way is to use the wet cloth to wipe, but avoid seeper.
??Car electronics maintenance knowledge of different brands of cooling fluid not to mix
??Different brands of cooling fluid to its chemical properties may differ greatly, such as black metal preservative, often on aluminum products has corrosive effect; and is applicable to aluminum alloy of iron alloy harmful preservatives. Due to the different brand coolant used preservatives are different, so don't mix.
??Car electronics maintenance knowledge of EFI car starts not to step on the accelerator
??Before starting the engine on a few foot accelerator, is a lot of driver's habits, especially in the winter cold start. But this starting method cannot be applied to the EFI car. Equipped with electronic fuel injection device for engine and carburetor type engine fuel injection control device, it can according to the engine temperature, automatic adjustment of oil supply condition, make the engine start smoothly, namely in the cold start, fuel injection control device can automatically increase the fuel supply quantity. Therefore, EFI car engine start, there is no need to step on the gas, but not before start of continuous jam, or rather bad start the engine.
??This article from the Personal/Office Electronics equipment, would like to learn more about the car electronics repair knowledge, Lighting & Electricals and LEDs & Optoelectronics repair products and services, please click on the car electronics, Lighting & Electricals and LEDs & Optoelectronics.

Log in to post comments.

Read comments on this blog post

No comments have been posted on this blog post.

Download Drive Magazine Now!

Advertisements

    Special Offers & Deals

Advertisement

 

Cars > tingyuya’s Garage > Blog > Share my car electronics maintenance of common sense tips

Print your passion at Motortopia.com (http://www.motortopia.com)