Cuba, New York
1968 Oldsmobile Cutlas Supreme
“bold olds 68”
1969 Chevrolet Chevelle SS
Head to Head
About “bold olds 68”
I purchased the car from a used car lot. Who informed me, that the car was from Eastern Washington. The car was an eye sore , but I knew it had potential! So I loaded it up on the trailer and took her home!
About “Crossram Rat”
Owned car since mid 80's, I am the third owner. Car came out of the Philly area. It has had two frame off resto's the latest coming just a couple of years ago 2003 to be exact.
It features an LS-6 454 with Merlin heads, Crane roller cam, Edelbrock crossram intake with two 500 cfm carbs, Mallory ignition, Dynomax headers. It's backed by a B&M th400 tranny and a GM 12 bolt with Richmond gears and Moser axles. Rolling on Weld wheels and Mickey Thompson rubber.
The car still retains most of the original GM sheetmetal. It has a Harwood 4" fiberglass cowl hood over the 600 hp BB Chevy. It is all covered in a PPG BC/CC Cherry Red metallic paint.
The black interior remains mostly stock with just a B&M Starshifter and a couple of Autometer guages installed.
The chassis also has stayed basically stock but just cleaned up and painted with much stainless, powdercoating and chrome
Specs for “bold olds 68”
350 Rocket, 60 Over!
Pushing 4 4 and a quarter.
1/4 mile is in the 12's
top speed is ???
Specs for “Crossram Rat”
454....030 over, Forged GM bottom end 4 bolt mains, Merlin Heads, Crane roller cam, Edelbrock crossram intake, twin Edelbrock 500 cfm carbs, Mallory ignition., B&M TH400 with 3000 stall converter, GM 12 bolt 4.10 rear w/ Moser axles. Ran 11.80's with different intake and head combo...feels stronger with the crossram,but haven't had it to the track yet.
Factory Options for “bold olds 68”
350 rocket , two speed hydro .matic trans limited slip reaqr end
Factory Options for “Crossram Rat”
Factory power steering, power disc brakes ,tilt wheel, strato bucket seat interior, and tinted glass, SS package
Mods for “bold olds 68”
All new suspension, total refurbished, KYB Shocks, Lightened Rods, 17 inch All American Racing Mags, 350 Gears positive track rear end
ENGINE: lightened crank, Roller Cam, MSD ignitiuon, Viktors JR 35 PSI intake Manifold, MSD Distrubitor, Headmann 17/8 , 21/2 inch Flowmaster Exhaust, with six fifty Holley Double pump vaccune assist, B&M shift kit, 3500 Stall Converter, And auto meter guages.
New re-stored interior and seats.
New Black pearl paintjob!
SYSTEM: Sony Head Unit with MP3 and USB adapter, Memphis 1200 Watt Amp, (2) 10 inch Memphis Subs, And 4 Sony Epold speakers 2 6x9 and 2 6and a halfs in doors!
Mods for “Crossram Rat”
I found the crossram intake in E-bay for 150 bucks, polished it, and fabricated my own linkage. Everything has been polished, painted, powdercoated, chromed or stainless. It has weld Wheels , Mickey Thompson rubber and a custom blend of PPG base coat clear coat cherry red paint.
Photo Albums 1 – 1 of 1
Photo Albums 1 – 1 of 1
Vote This challenge has ended!
|Points for bold olds 68||Total Votes||Points for Crossram Rat|