Cars > Challenges > “#ThunderDome” Vs “Punkin'”
1999 Chevrolet Silverado Z71
“#ThunderDome”
1986 Chevrolet S10 Blazer
“Punkin'”
Head to Head
About “#ThunderDome”
This was the first vehicle i ever owned. When i bought it, it was stock but no more. On the weekends i show the truck.
About “Punkin'”
1986 Chevrolet S10 Blazer 2 Door Rear Wheel Drive. This truck is a work in progress. Future plans include finishing up the engine compartment, detailing it, and adding a couple more odds and ends. The interior needs to be gone through, I plan on changing out the stock seats for some nice leather buckets. I want to have white racing stripes painted on and tint the windows. I may be a girl but don't let that fool you, I love fast and powerful cars. I know alot about cars and what I don't know my boyfriend is teaching me.
Specs for “#ThunderDome”
Faster through the mud then you....LOL
Specs for “Punkin'”
The engine is a built Chevy 327 with Fuelie heads. The transmission is a built turbo 350 automatic. It dynos at over 400 horsepower. I am unsure of the 1/4 mile time right now because the track is closed for the season, I plan on running it in the spring.
Factory Options for “#ThunderDome”
Fully loaded.
Factory Options for “Punkin'”
No factory options listed.
Mods for “#ThunderDome”
Engine Mods
* Vortech SuperCharger
* Gibson Headers
* Flowmaster 40 series mufflers
Suspension and Wheel Mods
* 12" Whiplash Lift
* 3" Body Lift
* Bilstein Nitrogen Gas Shocks with Resovoirs
* 39.5" Super Swampers
* 20" Weld Wheels
* AC Delco upgraded 4 wheel disc brakes
Interior Mods
* Leather and Suede Seats
* High End Looped Carpet
* Suede Headliner
Exterior Mods
* Candy Cobalt Blue Paint
* Ram Air Hood
* Toneau Cover
* Chrome Door Handles
* Chrome Taillight Cover
* Chrome 3rd Brake Light Cover
* Chrome Differential Cover
* Polished Driveshaft
* Clear headlights and running lights
* Billet Grille
* Denali Air Dam
* Piaa Fog Lights
* Welded In Roll Pan
Audio Mods
* IN PROGESS:
* 50 Elemental Designs EU700's
* 2 Sets of Elemental Designs eDi 6500's
* 4 Elemental Designs NINe.1's
* 2 Elemental Designs NINe.4's
Miscellaneous Mods
* Tinted Windows
* Chrome Differential Cover
* AMP Electric Steps
* Everything's painted under the hood
Mods for “Punkin'”
The engine is a built 327. The bottom end is the factory steel crank and H-beam rods, the block is bored with flat top pistons 10.5:1 compression. The heads are old school Fuelie heads that have been ported and have had a 3 angle valve job. The valves are 2.02 intake with 1.6 exhaust. The cam is a hydraulic roller style 550 lift 300 advertised duration, very very lumpy idle. It has roller lifters with 1.6 roller tip rockers. It has a double roller timing chain, but I may change it to a noisy gear drive. Ignition is a Mallory Uni-lite distributor with Accel Super Stock Coil, and Accel 8.8mm race wires. It has a Edelbrock Victor Jr. high rise aluminum intake with a Holley 750 4 barrel. It also has the s10 v8 swap headers made by Hedman. The engine dynos well over 400 horsepower. The transmission is a fully built race ready turbo 350 with a 2800 stall converter and manual valve body. The rear end is built with a posi and 3:73 gears. The exhaust is full 2.5 inch true duals with single chamber Flowmaster mufflers. The suspension is an all Belltech drop, with springs and spindles in the front dropping it 5 inches, and springs and blocks in the rear dropping it 6 inches. The wheels are Centerline 17"x9" polished aluminum. The paint is Hugger Orange, the body has shaved door handles. The hood is a Harwood fiberglass cowl hood with a 2 inch rise. There is also a fiberglass roll pan out back.
Vote This challenge has ended!
Points for #ThunderDome | Total Votes | Points for Punkin' |
---|---|---|
35 | 15 | 40 |
Cars > Challenges > “#ThunderDome” Vs “Punkin'”