Motortopia: Where your passion parks.

Motortopia > Diesel World > Tech > Installing Yukon Gear’s Spin Free Hub Kit > DW-1105-HUB-9a

 

Advertisement

Advertisement

Advertisement


Installing Yukon Gear’s Spin Free Hub Kit » DW-1105-HUB-9a

Before installing your new stub axle ends, check the inner surfaces for any burs or dings from shipping and handling. If any are present, lightly file the inner surface to remove them. We also test-fit the knuckle to see if it would clear the opening in the factory spindle and had to do a little more trimming. This was a prototype kit; the production kits have already addressed this problem.

Before installing your new stub axle ends, check the inner surfaces for any burs or dings from shipping and handling. If any are present, lightly file the inner surface to remove them. We also test-fit the knuckle to see if it would clear the opening in the factory spindle and had to do a little more trimming. This was a prototype kit; the production kits have already addressed this problem.


Leave a Comment

You must be logged in to post a comment.