Motortopia: Where your passion parks.

Motortopia > Muscle Car Power > TECH > A Magna Charger 6.2L Supercharger Kit Makes It Simple > MCP-1104-MAGNUSON-PIX-27

 

Advertisement

Advertisement

Advertisement

A Magna Charger 6.2L Supercharger Kit Makes It Simple » MCP-1104-MAGNUSON-PIX-27

After the spilt loom spacers are removed from the pre-installed manifold bolts and torqued to 106 in-lbs in a cross rotation pattern, connect the supplied MAP sensor extension harness.

After the spilt loom spacers are removed from the pre-installed manifold bolts and torqued to 106 in-lbs in a cross rotation pattern, connect the supplied MAP sensor extension harness.

After removing the tape from the heads and applying a silicone spray or suitable non-petroleum lubricant to allow some sliding movement, two people carefully lift the supercharger assembly in place on the engine.
Once the other end of the MAP sensor harness is connected to the MAP sensor (located underneath the rear fuel rail crossover tube at the back of the passenger side of the engine), plug the fuel injector connections to the injectors.

This entry was posted on Monday, May 2nd, 2011 at 11:34 pm and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Comment

You must be logged in to post a comment.