Motortopia: Where your passion parks.

Motortopia > Muscle Car Power > TECH > Baer Brake Systems’ Big Grippers for the 2010 Mustang > MCP-1010-Baer-13

 

Advertisement

Advertisement

Advertisement

Baer Brake Systems’ Big Grippers for the 2010 Mustang » MCP-1010-Baer-13

The ABS sensor is routed and prepped to mount once the VeriSlide bracket is installed.

The ABS sensor is routed and prepped to mount once the VeriSlide bracket is installed.

The mounting bracket for the caliper bracket is installed at the base of the axle tube with a U-bolt and the horseshoe-shaped bracket.
The Baer VeriSlide caliper bracket is installed per Baer’s instructions and is secured in place with Loctite on all of the hardware. The axles are reinstalled to allow the 14-inch rotors and six-piston calipers to be installed next.

This entry was posted on Wednesday, January 26th, 2011 at 6:25 pm and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Comment

You must be logged in to post a comment.