Motortopia: Where your passion parks.

Motortopia > Muscle Car Power > TECH > Installing a ProCharger Supercharger on a 3.8 V-6 Mustang > MCP-0901-super-4

 

Advertisement

Advertisement

Advertisement

Installing a ProCharger Supercharger on a 3.8 V-6 Mustang » MCP-0901-super-4

Then, we removed the radiator cover shroud using a pushpin removal tool. We used a flat head screwdriver to remove the crank case vent hose, disconnected the mass airflow sensor (MAF) and the factory air intake.

Then, we removed the radiator cover shroud using a pushpin removal tool. We used a flat head screwdriver to remove the crank case vent hose, disconnected the mass airflow sensor (MAF) and the factory air intake.

We disconnected the battery on the car.
We loosened and removed the power steering reservoir and set it aside.

This entry was posted on Wednesday, June 9th, 2010 at 7:59 pm and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Comment

You must be logged in to post a comment.