Motortopia: Where your passion parks.

Motortopia > Street Trucks > Tech > Project Greystone 6: Paint Graphics and Texture Tricks > ST-1012-PAINT-56

 

Advertisement

Advertisement

Advertisement

Project Greystone 6: Paint Graphics and Texture Tricks » ST-1012-PAINT-56

DH200 Hardener and UR60 High Temp Reducer are poured into the clear with a 3:1 ratio of clear to hardener with a 10 percent addition of the reducer.

DH200 Hardener and UR60 High Temp Reducer are poured into the clear with a 3:1 ratio of clear to hardener with a 10 percent addition of the reducer.

Once all of the graphics and paint are completed, the truck is moved out of the paint booth into a heated spray booth where the clearcoat will be applied. The BASF R-M DC98 clearcoat is solvent-based but VOC compliant with a level of 2.0.
ST-1012-PAINT-57

This entry was posted on Thursday, August 11th, 2011 at 6:45 pm and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Comment

You must be logged in to post a comment.