Motortopia - EVERYTHING Automotive!
Close

Built Together: A Father-Son 1972 Chevy C20

Devan Ence . November 18, 2026 . Chevrolet
Save ArticleLogin to save it

AS SEEN IN OUR C10 Builders Guide Winter 2026 ISSUE – Buy Now!

Mason and Colby Hackbarth’s Cummins-Powered ‘72 C20

Some builds are about the truck, while others are about who was standing beside you when the work got challenging. Mason Hackbarth’s 1972 Chevy C20 belongs in that second group. The patina-green C20 swap was built by Mason and his father, Colby. What started as a shared passion and a senior project became a three-year build, and when the chance came to take the truck to SEMA, it gave them the push they needed to finish what they had started.

The truck was close, but anyone who has built one knows “close” can still mean a long list of small problems. Brackets, mounts, wiring, clutch adjustment, stance, drivability, and final details all take time. For Mason and Colby, SEMA became the deadline that turned the project from “almost done” to “let’s finish it and show the world.”

1972 Chevy C20

At first glance, the C20 still carries the character of a 1972 Chevy that spent 54 years of being in the sun and being used around the farm. The green patina on the body was clear-coated to preserve its character and signs of age. That choice gives it honesty. The body tells one story, however, while the chassis and drivetrain underneath tell another.

1972 Chevy C20

The biggest change is the foundation. Instead of keeping the original Chevy frame, Mason and Colby placed the C20 body on a 1990 Dodge chassis. That move changed the entire personality of the truck. This is not just a diesel swap. It’s a full chassis swap that brings together the best of both worlds.

Getting the body to sit correctly took a fair amount of fabrication. The frame received custom body mounts, and the rear axle was moved forward to make the proportions work. Trent Gasser came in and helped with some of the frame modifications and was a big part of getting the build running during the crunch time before SEMA. Trent’s help freed up Mason and Colby so they could focus on installing the suspension components, buttoning up the wiring, and getting the interior dialed in. That hands-on involvement is part of what makes the build personal. They were not just sending the truck out and waiting for it to come back. They were part of the work.

The heartbeat comes from a 5.9L Cummins with an upgraded injection pump. Behind it is the manual transmission from the donor truck, keeping the driving experience connected to the mechanical nature of the swap. Mason would still like to upgrade the turbo and do a few other things. The build isn’t “finished,” but let’s be honest—are they ever really finished?

1972 Chevy C20

One of the main challenges came from getting the clutch rod length right. Making the Dodge transmission work correctly in the Chevy required adjustment so the pedal engaged the way it should. It was not the most visible part of the build, but those are often the details that determine whether a swapped truck is frustrating or enjoyable. Mason and Colby worked through it, adjusted the length, and got the pedal feel where it needed to be.

1972 Chevy C20

The C20 rides on a SkyJacker 4-inch lift with Black MAX shocks in the front and the rear. Mason admits the lift install was the easiest part of the build, which says a lot considering the scale of the chassis and drivetrain swap. Sitting under the chassis, 35×12.50 Travelstar EcoPath M/T tires are wrapped around 24×12 Fittipaldi FTF508 wheels. Mason says that the tire package clears without rubbing issues, which was something they were worried about.

1972 Chevy C20

Inside, the truck stays simple with OEM seats and gauges. That simplicity works with the rest of the build. The truck does not need a full custom interior to make its point. The story is in the swap, the stance, the patina, and the fact that Mason and Colby built it together.

1972 Chevy C20

The C20 has been to SEMA and the Snake River Truck Show—two very different stages for the same truck. At SEMA, it represented the result of years of work and a final push to make the deadline. At the Snake River Truck Show, it came back to a community where people could walk around it, ask questions, and understand what went into putting a 1972 Chevy body on a 1990 Dodge chassis.

For Mason, the most unique feature is clear: the full chassis swap with a Cummins under the C20 body. But the real heart of the build is the time spent with his dad. Three years of problem solving, late nights, and pushing through the last details created something bigger than a truck.

When asked what advice he would give someone building something similar, Mason kept it simple: don’t rush the process, and don’t get discouraged when issues arise. That advice fits this C20 perfectly. It took time, patience, and a father-and-son effort to get it done. The result is a truck that made it to SEMA, while carrying its history in plain sight. That pride in that accomplishment alone left Mason ready to take on another project.

1972 Chevy C20

1972 Chevy C20

 

Owner

Mason Hackbarth
1972 Chevy C20
Idaho Falls, ID

ENGINE & DRIVETRAIN

1990 5.9L Cummins inline-six
Upgraded injection pump
Custom engine mounts and custom transmission mount
Manual transmission from donor truck

CHASSIS & SUSPENSION

1990 Dodge frame
Custom body mounts, rear axle moved forward
Framework by Trent Gasser, Rigby, ID
SkyJacker 4-inch suspension lift
SkyJacker Black Max shocks front and rear
Suspension installed by Mason and Colby Hackbarth

WHEELS & TIRES

24×12 Fittipaldi FTF508 wheels
35×12.50R24 Travelstar EcoPath M/T tires

BODY & PAINT

Patina green body
OEM grille

INTERIOR

OEM seats
OEM gauges

X
We value your privacy

We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffic. By clicking "Accept All", you consent to our use of cookies. Visit our Cookie Policy for more info.