Drive Staff March 10, 2023 Buyer’s Guides
Completely bolt-in watts link system for ’63-’72 C/10 trucks; that will work with factory trailing arms and springs, or with our billet trailing arms and coil overs. This kit will keep the factory rear end centered throughout its travel while, providing a truss-like structure for the axle tubes. Our watts link kit will also allow for slight pinion adjustment and includes extra mounting holes at the frame brackets, to maintain correct watts link geometry when going with a lower stance. Comes complete with Grade 8 hardware.
#6272GMWL ‘63-’72 Chevy/GM Truck Bolt-in Watts Link with Fabricated Center Crank — 1-844-BILLET1 (245-5381) – allamericanbillet.com
Give your classic truck a facelift. Install a new set of show quality bed wood from BedWood for Trucks© in your pickup truck. Get the ultimate in truck parts and an upgrade in style from your choice of over 40 exotic and domestic woods. You can further personalize your truck bed with a selection of five styles of bed strips, four of which with hidden fasteners. BedWood for Trucks©, the professionals choice. All of our wood products are proudly USA Made Kentucky Handcrafted™.
For more information or to purchase, go to bedwoodandparts.com
or call 877.206.9663 (WOOD).
The new 4x Four-Speed™ Auto Transmission, Non-electronic 700R4-based from TCI® allows the use of a 700R4 transmission with non-GM applications, without the need for difficult-to-install mid-plates.
TCI® designed the 700R4-based version of its new 4x Four-Speed™ transmission line with interchangeable SFI-spec bell housings for easy installation of a 700R4 behind a Small or Big Block Ford, Ford Mod, Small or Big Block Chrysler, Gen III Hemi, Buick, Pontiac, Olds or GM engine. The fully mechanical transmission also includes an adapter flexplate, transmission cooler, dipstick and all necessary hardware. – tciauto.com
California Pony Cars launches the latest AOD Conversion kit added to our product line. The 1965-1966 AOD Conversion Kit for Holley Style Carburetor is a part that you won’t want to miss out on. California Pony Cars takes pride in offering high-quality parts that are destined for greatness. This kit makes it easy to convert your 289/302/351W/ engine from a C4 or C6 transmission to an AOD automatic overdrive transmission using aftermarket Holley Style Carburetor.
The latest to come from Custom Autosound! The most original looking, direct OE fitment radio ever produced! Over 3 years in development! Shipping applications for 64-73 Mustang, 68-76 Corvette, 67-72 GMC/Chevy truck, 67-73 Cougar, 64-66 Falcon, 62-65 Chevy Nova, 55/56 Bel Air, 57 Bel Air. Appears analog and with a slide of the SlideBar the digital display is revealed!
(800) 888-8637
customautosound.com
Installs in 5 minutes with no wiring or professional help needed. Included mobile app for Android and iOS provides instant audio, visual, and vibration alerts for objects detected in front or behind your vehicle (Patent Pending).
The CarLock Tag, is a revolutionary solution that allows the arm and disarm of CarLock security notifications without the users’ input, creating a hands-free solution. We are simplifying the way our users interact with our system. With the CarLock Tag, our company Protectus Technologies continues to provide vehicle owners worldwide with peace of mind while they are not in the vicinity of their vehicle. Carlock Tag enables and disables alerts based on the owner’s distance to the vehicle via smartphone connection. 100% hands-free – no need to even take it out of your pocket!
Dakota Digital – carlock.co
Raw lumen output: 2340 lm, Effective lumen output: 1638 lm Replace standard 4” x 6” sealed beam halogen and HID headlights Light output whiter than incandescent for greater visibility Long lasting, energy efficient – diodes last up to 50 times longer than incandescent Dual power: use with 12VDC or 24VDC systems Die cast aluminum construction with powder coat finish resists corrosion IP67 rating: protected from dust and capable of withstanding water immersion, offering increased reliability and service life
Superior ignition stability for more power that is perfect for oval track or high-performance use
Recaro Automotive Seating now presents the redesigned Recaro Sportster GT for today’s top sport luxury automobiles, representing the latest in aftermarket seating technology.
It features a sleek backrest with Recaro’s victory design and uses advanced performance materials ranging from high-grade leather to sport cloth. The hybrid seat design incorporates the strength of a metal base with an ultra-thin reinforced polymer based backrest.
Honoring more than 50 years in motorsport and the performance aftermarket, MOMO is launching the Heritage 6, the first road wheel in its Heritage Collection. Available in 17” and 18” diameters, the Heritage 6 offers a pure motorsports design for both classic and modern sports cars.
The MOMO Heritage 6 wheel is a classically designed six-spoke wheel drawing design inspiration from the wheels used on MOMO race cars in the 1980’s and 1990’s. It features the flat spoke faces of the original MOMO competition wheels while allowing for large, modern brakes.
Wilwood’s Classic Series front disc brake conversion kits for the 1960-1970 Chevrolet C10 truck drum brake spindles provide an affordable and easy-to-install solution to upgrade from the factory drum brakes.
The kits feature forged Superlite six piston calipers with BP-10 metallic composite compound SmartPads, and 11.86” diameter one-piece vented rotors that convert from the factory 6 lug to the more popular 5 x 4.75” / 5 x 5.00” wheel stud pattern
Watson’s StreetWorks is now offering a battery cut-off that will handle the largest charging systems. Whether you are looking for a theft deterrent or a simple way to disconnect your battery, this is a great solution. This rugged new sealed unit is built for a continuous load of 300 amps and will handle 2,500 amps for a 10 second surge. Overloading a smaller battery disconnect will burn it out and leave you stranded. This new weatherproof unit measures 5” x 3 ¾” x 2” so hide it wherever you need to. The terminal ends can handle the largest cables. A low amperage bypass circuit keeps your clocks and computers alive. An output is included for an optional status light. Two switch options are available. Switch, hardware and instructions are included.
Meguiar’s® Ultimate All Wheel Cleaner is an active gel formula that clings to wheels and stays wetter longer providing better cleaning action than traditional foaming wheel cleaners. This advanced chemistry blends road grime attacking surfactants with active brake dust dissolving agents that work to quickly loosen dirt, grime and brake dust allowing for little to no agitation. The deep-cleaning formula turns brake dust purple and road grime brown as it gently loosens stubborn contaminants, so you’ll know that it’s working to get wheels back to a “like new” appearance.
United Pacific Industries has released four new replacement body parts for 1967 and 1968 Ford Mustang, additions to the products already offered by the company for classic Mustang owners.
Two Eleanor styles and two Shelby styles were released for 1967 to 1968 Mustangs. The Eleanor styles include an Extended Eleanor Style All Steel Hood and a Fiberglass Front Valance. Shelby styles include the Fastback Shelby Style Quarter Panel Side Scoop – Upper Pair and the Shelby Style Quarter Panel Side Scoop – Lower Pair. All products were tested on original Mustangs and Shelbys in order to check for proper fitment.
The 1967 Ford Mustang Extended Eleanor Style All Steel Hood, product #110648, is extra-long at the front to match up with the Eleanor and Shelby style nose for those who are converting over to the Eleanor Style Mustang. This steel hood can be used on 1968 Mustangs which have a 1967 extended nose. Fiberglass Front Valances, product #110650, are constructed from high-quality fiberglass and are an accurate reconstruction with all of the original contour details and cutouts in the iconic Eleanor Style.
For more information, call 866.327.5288 or visit UPauto.com
Control arms include bump stops and have improved ball joint clearances.
Our tubular upper and lower tubular control arm set is great way to improve front end strength and handling by offering less deflection than factory stamped units. Aldan Phantom Series, single adjustable coilovers deliver superior handling and ride quality for a drastic improvement over stock suspension.
Applications: 55-57 Bel Air, 64-67 Chevelle (A-Body), 68-72 Chevelle (A-Body), 67-69 Camaro/Firebird, 68-74 Chevy II / Nova Available for Small Block or Big Block.
Bar’s Leaks® introduces Professional Oil Seal™ Engine Oil Burning and Leak Repair, its most advanced oil solution. This professional-grade formula is guaranteed to permanently stop all engine oil loss caused by leaks, over-consumption and burning.
Oil Seal Engine Oil Burning and Leak Repair’s unique combination of synthetic polymers combined with premium seal-restoring additives work together in four ways to create a long-lasting repair.
Oil Seal Engine Oil Burning and Leak Repair’s no-hassle formula can be added when the oil is low or during an oil change. Once added, it starts to work within 15 minutes of driving or idling the vehicle. In most cases, the oil leak will be repaired with a single dose. Bar’s Leaks backs its new Oil Seal Engine Oil Burning and Leak Repair with a limited lifetime warranty.
The ADV7.2 is the first wheel to come from the strategic alliance between ADV.1 and British performance wheel manufacturer, Dymag Group. The CF.2 construction consists of an aerospace-grade 6061 forged aluminium center utilizing the recently launched lightweight ADV.1 Advanced Series design. It is paired with a patented Dymag BOXSTROM carbon fiber hybrid barrel. The two are joined by lightweight Tikore titanium hardware.
The result is a wheel that is up to 40% lighter than OEM cast aluminium wheels, with a corresponding 40% lower moment of inertia – meaning drivers will experience faster acceleration, sharper braking, as well as vastly superior handling; all without compromising safety.
The alliance between ADV.1 and Dymag has resulted in an exclusive design and unrivalled performance. No other companies can bring together the design, engineering, and material expertise to deliver this level of performance, design and style.
The new Rogue Series includes T3 and T4 turbocharger covers and kits, 6-inch and 1-foot pipe shields, and 1-and 2-inch by 50-foot exhaust wraps, in both Carbon Fiber and Ricochet Black color schemes. While basalt products have existed in Thermo-Tec’s product catalog for more than three years, the new Rogue Series consolidates them into a single line, shining a well-deserved spotlight on a proven performer that keeps heat where it need to be, and looks good while doing it.
To learn more, go to rogueseries.com
ExtremeTerrain.com has partnered with professional freestyle motocross rider Brian Deegan to create and release the Deegan 38 line of Jeep® parts and accessories. Available for Wrangler JK model years 2007 to 2018, the Deegan-branded aftermarket products are an ExtremeTerrain.com exclusive.
ExtremeTerrain provides the most desirable parts at the best prices. Located just outside of Philadelphia, ExtremeTerrain is dedicated to offering the Wrangler community with the highest quality of parts and service.
Visit extremeterrain.com for more information.
The 16V Fan was created after GC Cooling recognized a large demand for a high-performance cooling fan which could efficiently run on 16 volts.
Drag and circle track racers are opting to use 16 volt batteries to boost their ignition system as well as other components. The hotter spark caused by the higher voltage allows the vehicle to run a larger spark plug gap and boost the carburetor. When the hotter spark is combined with increased fuel, improved performance is achieved.
“We noticed the need for a 16V fan when we started working with Street Outlaws and the drag racers on the show such as James Goad and Jeff Lutz. After we worked on the 16V Fan, we were able to work with some top racers from Hot Rod Drag Week, including Lutz Race Cars and Joe Barry Motorsports, to put the fan to the test and get quick feedback,” said Bob Folkestad, owner of GC Cooling.
The 16V fan is available in a 16-inch diameter in a nonreversible push or pull configuration. 16V Fans have an overall depth of 3.5-inches and are a compact size.
For more information, visit www.GCCooling.com or call 515-645-5908
“The new Katech 416 short block is a big-power foundation that won’t break the bank,” said Jason Harding, director of aftermarket operations at Katech. “Shop around, and you’ll find our 416 LS3 short block is priced at or below competitors’ products while using top-shelf components and, of course, the meticulous precision blueprinting and assembly that 40 years of engine building experience brings.”
For more information call 866-KATECH1 or visit katechengines.com.
Real Deal Steel now offers new-to-market original reproductions of the seat tracks for all two- and four-door bench seats in 1955-1957 model Chevrolets, as well as 1955-1957 Pontiac Catalina models.
These zinc finish steel reproduction sets also include the adjuster wire. They are in stock and ready to ship.
One- piece, forged, monoblock VX1-Truck wheel for discerning truck and SUV owners who want to make a powerful statement with top-of-the line custom wheels. Engineered to be lightweight while delivering minimal deflection and excellent fatigue strength, the custom wheel experts at Forgeline designed the VX1-Truck offering with larger six-lug fitments specifically for applications such as Cadillac Escalade, GMC Yukon, Chevrolet Tahoe, and Ford Expedition, as well as Ford and Chevy full-size pickups.
For performance-minded truck owners, Forgeline’s new VX1-Truck wheel is the ultimate choice in style and strength.
The wheel’s powerful Y- six spokes wrap around the lug holes, creating striking sharp angles, and a deep concave profile. Delivering real performance metrics, the VX1-Truck was developed using manufacturing technology similar to Forgeline’s legendary GA1R and GS1R racing wheels. Machined from 6061-T6 aluminum, its one-piece monoblock forging and computer-simulated FEA design process yield a lightweight, stiff and exceptionally strong wheel.
For more information call 1-800-886-0093 or visit forgeline.com
Classic Industries, the leader in quality restoration parts and accessories worldwide, today announced new OER® reproduction quarter panel emblems for 1967-68 Coronet models, including 440 and 500 trim levels. Each emblem is die cast, chrome plated and accentuated with factory correct paint as originals. These emblems feature accurate markings on back (where applicable) indicating officially licensed by Mopar. Emblems are sold individually. Mounting nuts included.
Classic Industries can be reached toll free at 1-855-357-2787 – classicindustries.com.
Custom built exterior moldings are available from McMillan Rod and Custom. Adding a custom touch to your ride with the addition of these moldings can be the difference between a nice car, and a show stopper.
Built from their polished stainless “Low Profile “line of molding stock, they are available in 1/2”, 3/4”, and 1” widths. They will shape your moldings to match your car’s contours providing that you send them a pattern.
(715) 387-6847 or mcmillanrodandcustom.com.
If your race vehicle undergoes rapid G-force changes, you need to check out FUELAB’s Fuel Surge Tank Systems. Whether your racing of choice involves drag racing, drifting, off-road, road racing, or going in circles, this system is designed to keep your engine running at its highest level. FUELAB’s Fuel Surge Tank Systems make sure your engine doesn’t starve for fuel while undergoing rapid G-force changes like at the launch, hairpin turns, banked ovals, or going over sweet jumps.
FUELAB’s Fuel Surge Tank Systems keep a small amount of fuel at the ready when your race vehicle undergoes G-force changes. With its own internal 340 LPH or available dual 340 LPH fuel pumps, FUELAB’s Fuel Surge Tank Systems keep fuel starvation at bay, and are compatible with pump gas, race gas, and E85.
These fuel surge tank systems are available in two sizes, and feature billet aluminum and O-ring construction with -8 AN fuel ports. Furthermore, FUELAB’s Fuel Surge Tank System upgrade accessory kit includes a floor mount bracket, hardware, XRP PRO PLUS hose assembly, and a 90-degree, high-flow fitting for a true bolt-in installation.
To get your FUELAB Fuel Surge Tank System, call (618) 344-3300, or go to fuelab.com.
Baja Designs has released a new Angled Flush Mount Light available in two configurations: Sport and Pro. The “Scientists of Lighting” designed the Angled Flush Mount Lights to easily mount to any flat surface while producing exceptional lighting output of 2,260 lumens for the Sport and 4,900 lumens for the Pro lights.
760-560-2252 or visit bajadesigns.com
Replacing the factory “big sweep” speedometer and idiot lights on 1960-63 GMC pickups can easily be accomplished with a new bolt-in instrument panel kit from industry leader Classic Dash. Installed using common tools, the kit comes with a choice of 14 different style Auto Meter gauges, or the Thunder Road concourse series. The standard package includes a 3-3/8” diameter tachometer and speedometer plus 2-1/6” oil pressure, water temperature, fuel quantity and voltage gauges. Turn signal, high beam and parking brake indicator lights (LED) are included in the package. – ClassicDash.com.
Exterior mirror is available both with and without the LED turn signal, but the LED turn signal does allow for greater safety when changing lanes. Featuring red LED lights on the mirror itself, the outside mirror fits both sides of the vehicle in the original mirror mounts with the passenger side available with a convex mirror for wider viewing area. Driver side and passenger side mirrors are sold separately, allowing customers to choose between options. Mirror arms and heads are chrome die cast.
For more information, call 866.327.5288 or visit UPauto.com
The Wheel Smith offers custom wire wheels and wheel accessories, including TrueSpoke wire wheels. Wheels available in 14in, 15in, 16in, 17in, 18in. All popular bolt patterns. Finishes include Bare Steel, Powder Coated, Chrome.
The Wheel Smith builds all wheels to order and will modify your hub caps to fit The Wheel Smith’s wheel designs. Trim Rings available in 14in, 15in, 16in, 17in.
Fully Electric Power Steering Option for Classics, Sports Cars and Street Rods Installing modern power steering just got much easier with American Powertrain’s™ new bolt-on EZ Electric Power Steering system. Introduced several years ago for popular Ferrari, Jaguar and Porsche model sports cars, American Powertrain now offers this same cutting-edge technology for classics, early model sports cars, street rods and custom builds.
Complete systems are currently available for 1955-68 Corvettes, 1965-70 Mustangs and Cougars, and for street rods and most European sports cars. Systems for the Camaro, Tri-5, Chevelle and other popular models are on the way. All EZ Electric Power Steering systems are covered by American Powertrain’s two year warranty.
For more information about American Power’s EZ Electric Power Steering systems or TREMEC transmission kits for Ford, GM or Mopar, visit americanpowertrain.com. To speak with one of American Powertrain’s highly qualified technicians, call 931-646-4836.
Eddie Motorsports line of Billet Aluminum hood hinges! Precision CNC machined in the USA from high quality 6061-T6 Aluminum, The hinges utilize sealed roller bearings at critical pivot points to ensure consistent, long lasting action and include stainless steel nitrogen gas struts for smooth, uniform operation.
Eddie Motorsports has billet aluminum hood hinges available for many models ofChevy and Ford Classic Trucks.
Increased the core size and volume of the new Mishimoto intercooler to boost air-cooling efficiency. You’ll see an increase in core volume by 77% over stock and external fin surface area by 163%! The new intercooler design also focuses on strength with cast end tanks and bar-and-plate construction, this core has a much greater resistance to the outside elements.
Howards Cams has a Rattler Camshaft to fit most applications, whether flat or roller tappet, and in a variety of profiles. Howards’ camshafts are designed for maximum performance and offer precision oil control, and they use the highest-grade race-quality cores available. All hydraulic and mechanical flat tappet camshafts are 100% Rockwell checked and Parkerized to ensure the highest quality-control standards available anywhere. These camshafts are manufactured on dedicated high-precision CNC cam-grinding machines.
These Muscle Car specific 1.5 Street Performance Series Shock Absorbers feature cutting edge, mono tube shock technology. The shocks, manufactured in the USA by Fox, are built around a lightweight, smooth-bore hard anodized aluminum body. Internally, the shocks incorporate a high-flow piston and digressive disc design coupled with a specially formulated oil and high pressure nitrogen combination. The result is excellent shock performance during relaxed street cruising and intense track driving.
With the popularity of the LS motors in our cars, one of the first things that we do is to put some kind of slick looking engine cover on it. This is fine and really improves the looks but how do you make it stand out from the others. McMillan Rod and Custom can supply you with solid stainless steel moldings to dress the cover up. Available in various sizes and lengths you can attach with studs or two sided tape.
For these and other innovative products, call 715-387-6847 or visit them at McMillanRodandCustom.com.
Wilwood’s two newest pedal assemblies simplify the installation of tandem outlet brake master cylinders in vehicles also equipped with a hydraulic clutch. Most racing pedals are designed to only accept vertical mount flange, single outlet master cylinders. These new pedal assemblies are specifically designed to accept vertical or conventional horizontal mount flange, single pushrod, tandem outlet master cylinders on the brake side.
It is the perfect choice for all types of hot rods, purpose-built vehicles, and racecars where a brake balance bar is either not practical, not desired, or not allowed by rules. Models are available with either 6.25:1 or 7.00:1 leverage ratios.
For more information, contact Wilwood Engineering atinfo@wilwood.com
About Wilwood Engineering
Founded by Bill Wood in 1977, Wilwood Engineering designs and manufactures high-performance disc brakes and components from their headquarters in Camarillo, California. Engineered and rigorously tested for any application, Wilwood celebrates 40 years of unsurpassed braking quality and performance with sleek, modern designs. From race cars to classic cars, Wilwood has the brakes to stop you.
Please wait...