Motortopia - EVERYTHING Automotive!
Close

Father-Son 1956 Ford F-100 Custom Truck Build

DAMIEN DAVIS . November 17, 2026 . F Series Builders Guide
Save ArticleLogin to save it

AS SEEN IN OUR Street Truck Sept 2026 ISSUE – Buy Now!

Farm-Hopper to Show-Stopper

Some truck builds start with a plan. Others start with memories. For Matt Svetelecich, this 1956 Ford F-100 started as something far more valuable than a project; it was family history. The truck was an eighth-grade graduation gift from his grandpa, but its story goes back even further. Matt remembers hauling corn in it as a kid and learning to drive it down a country road at just 14 years old. Those memories made it impossible to let the old Ford fade away. Instead, Matt and his dad, Butch, spent the next 11 years bringing it back better than anyone could have imagined.

1956 Ford F-100

What makes this F-100 special isn’t just the finished product—it’s how much of it was built in-house. Rather than reaching for a catalog every time they needed a part, Matt and Butch rolled up their sleeves and made it themselves. The custom-fabricated list is long: the bed, tailgate, running boards, bumpers, radiator support, firewall, inner fenders, hood hinges, dash, and even the bed floor all came out of their own shop. The body was cleaned up with a pancaked hood, shaved and rounded doors, smoothed cab seams, and widened rear fenders before being covered in Granite Crystal paint. Pop the tailgate, though, and the real surprise waits inside—a hand-ground House of Kolor UK05 Cobalt Blue Kandy-coated bed floor that’s as much artwork as it is sheetmetal.

1956 Ford F-100

Lift the hood and things only get better. Sitting between the frame rails is a healthy 408 ci Windsor backed by a built Ford AOD overdrive transmission. The balanced and blueprinted small-block packs Scat rods, Keith Black pistons, a Comp Cams Mutha’ Thumpr cam, ported heads, an Edelbrock RPM intake, and a 750-cfm Edelbrock carb. Custom stainless exhaust lets the Windsor bark with authority, while a Boss Hog converter and upgraded AOD internals make sure all that power gets to the pavement through a Ford 9-inch rear stuffed with 3.70 gears.

1956 Ford F-100

Underneath, this F-100 blends old-school style with clever engineering. The factory frame has been boxed, cross-membered, stretched two inches in wheelbase, and C-notched four inches in the rear. Up front, a Plymouth Volare torsion-bar suspension, home-built drop spindles, and custom upper control arms help give the truck a low stance without sacrificing drivability. Rolling on Holley Rocket Racing wheels wrapped in wide Mickey Thompson ET Street SS rubber out back, Matt’s F-100 has the muscle-truck attitude to match its clean lines.

1956 Ford F-100

1956 Ford F-100

Inside, the custom touches continue with a handmade dash, one-piece headliner, custom door panels, hidden storage under the seat, a Billet Specialties steering wheel, Marshall gauges, and an Alpine sound system that keeps the tunes rolling between shows.

The biggest challenge? Figuring out how to build so many one-off pieces from scratch. Matt says countless hours of sketching, Photoshop mockups, and 3D modeling helped turn ideas into reality, but there weren’t any shortcuts taken. Looking back, he says the easiest part of the build was simply “watching dad.”

After earning Top 20 honors, first place in the radical truck class, outstanding engine, and outstanding interior categories at the Chicago World of Wheels show, it’s safe to say those 11 years were time well spent. More importantly, this ‘56 Ford proves that the best truck builds aren’t measured in dollars or horsepower—they’re measured in memories made along the way.

1956 Ford F-100

1956 Ford F-100

Truck Specs

Engine & Drivetrain

1969 Ford 408 ci Windsor V-8
Balanced and blueprinted
Scat connecting rods
Keith Black pistons with Moly rings
10.25:1 compression ratio
Lightened, polished, and chamfered crankshaft
High-volume oil pump
8-quart oil pan
Comp Cams Mutha’ Thumpr camshaft (.522/.526 lift, 291/311 duration)
Ported heads with stainless swirl undercut valves (2.02/1.65)
Edelbrock RPM intake manifold
Edelbrock 750-cfm carburetor
MSD Pro-Billet distributor and 6AL ignition
Custom stainless 2.5-inch exhaust
Gear reduction starter
Custom-fabricated power steering, A/C, and alternator brackets
1984 Ford AOD automatic
TransGo Stage 2 shift kit
Boss Hog 2,800-stall converter
4R70W internal upgrades
3/4-inch direct-drive shaft
2-inch Kevlar band
Ford 9-inch rearend
31-spline axles
3.70 gears
Limited-slip differential

Chassis & Suspension

Boxed and cross-membered factory frame
Rear C-notched four inches
Wheelbase stretched two inches
Plymouth Volare torsion-bar front suspension
Home-built drop spindles
Home-built upper control arms
Gabriel Ultra Gas shocks
Reverse-eye rear leaf springs
Chrysler steering box
Custom-fabricated 22-gallon fuel tank

Wheels, Tires & Brakes

18×8 and 18×12 Holley Rocket Racing Attack wheels
245/45R18 Hankook and 345/35R18 Mickey Thompson ET Street SS tires
Hydroboost braking system
1-inch bore dual-reservoir master cylinder mounted under cab

Body & Paint

Diamont Granite Crystal basecoat/clear coat
House of Kolor UK05 Cobalt Blue Kandy-coated bed floor
Shortened 1956 F-100 grille
MGLLIGHT 7-inch LED headlights with turn signals
Custom-fabricated bumpers
Widened and extended rear fenders
Custom taillights
Pancaked hood
Shaved and rounded doors
Smoothed cab seams
Removed cowl vent
Custom-fabricated bed, tailgate, running boards, radiator support, firewall, inner fenders, dash, hood hinges, and bed floor

Interior

Custom-fabricated seats
Blue and gray vinyl/cloth upholstery by Gary Dunow
Custom dash
Custom door panels
Custom speaker grilles
One-piece headliner
Power windows
Storage seat
Marshall gauges
Billet Specialties steering wheel
Alpine UTE-73BT head unit
Alpine 6.5-inch component speakers
Alpine 12-inch subwoofer

 

X
We value your privacy

We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffic. By clicking "Accept All", you consent to our use of cookies. Visit our Cookie Policy for more info.