Motortopia - EVERYTHING Automotive!
Exciting News! Motortopia App Now Available on Apple App Store!  
Close Ad

NEW PRODUCTS

MICHELLE SALCEDO September 27, 2022 All Feature Vehicles

McLeod Single Disc Clutch Kit for LS Engines

The McLeod Street Pro single-disc clutch is now available for direct fit to the LS2, LS3 and LS7. For the LS1, it can be used in conjunction with a recessed-style LS flywheel.

This unit is a great entry-level performance clutch for cars with mild performance modifications. It has a steel-backed organic disc with a sprung hub, providing smooth engagement and a great pedal feel.

Mcleod Racing
Mcleodracing.com


Trend Performance Valve Locks and Lash Caps

Trend valve locks and lash caps are produced to suit valve stem diameters of 6mm, 7mm, .310 inch and .311 inch.

Manufactured with either a radius groove or a square groove, the locks are available with outside angles of 7, 8, 9 or 10 degrees and have full engagement with the valve stem, the keeper groove and the angled interface of the retainer; the fuller the engagement, the stronger the joint.

Trend Performance
Trendperform.com


Aeromotive Phantom Fueler

Put an electronic fuel pump inside almost any fuel tank; no welding or sumps, just install and drive. The Phantom Fuel System is a complete kit that installs a high-performance fuel pump into almost any gas tank. And, it controls fuel slosh and eliminates vapor lock and cavitation.

Aeromotive
Aeromotive.com


Good Vibrations Gear Drive

Is your timing chain not getting the job done? Then you may want to step up to a bulletproof gear drive. These housings are machined from Alcoa aluminum, and the gears are machined from heat-treated steel and finish-ground after heat treatment. The removable cover allows quick and accurate cam timing. One of the strongest and finest gear drives on the market, it comes as 3/8 cam hex. It also works on engines with a tall cam for Chrysler 426 and 440, BAE, KB and AA-500.

Good Vibrations
Goodvibesracing.com


SmartWasher

The SmartWasher is an affordable, state-of-the-art unit that can handle the difficult work of cleaning your dirtiest parts. It’s easy to use, simple to maintain and built to last.

The USDA, AQMD and ETL have all certified and approved the SmartWasher system, and while it’s environmentally responsible and safe, it’s also intensely powerful. With no flash-point, no toxic solvents and no waste hauling, the SmartWasher is the powerful alternative to solvent. Go green without compromise and eliminate the generation of liquid hazardous waste.

Pride Machinery
Pridemachinery.com


Ron Francis Wiring for Fox Body Mustangs

The latest addition to the Ron Francis lineup is a complete front lighting harness for 1991-93 Mustangs. These come complete with everything needed, including factory correct connectors, terminals and quality crosslink automotive grade wire with high temperature covering. As with all its products, Ron Francis Wiring takes great care in ensuring easy installation that matches the factory fit perfectly.

Ron Francis Wiring
Ronfrancis.com


Dart LS Next Engine Block

One year after revealing its remarkable cast-iron LS Next engine block, Dart Machinery reduces the block’s mass and announces an aluminum counterpart.

Race engine builders will appreciate extended cylinder bores that allow a 6.125-inch con rod and a 4-inch stroke to operate while the piston remains squarely in its bore. They will also be comforted by the introduction of Dart’s proven priority mains oiling system, which ensures lubrication reaches the crank and rods first.

More encouragingly, standard LS components are compatible with the Next block. Featuring a standard deck and head bolt pattern, the LS cam and stock oil pump and all other components are accommodated. Steel main caps are featured with 7/16-inch bolts properly splayed to take anchor in the safety of the block’s more reinforced areas.

Dart Machinery
Dartheads.com


The EZ Oil Drain Valve

The new and improved EZ oil drain valve with optional hose ends replaces your existing drain plug, for fast, clean and easy oil changes. No more hassle, and no need for special tools, just turn the lever of the nickel-plated brass ball valve, and drain engine oil. When it’s time for an oil change, just lift the lever and give it a quarter turn to open. To close, return the lever back to its original locked position. Screw in the optional Hose End (sold separately) and connect a hose to drain the oil to a remote receptacle.

Ez Oil Drain
Oildrainvalve.net


 

Share your EVENT!
Official Motortopia Event Schedule
SHOW US YOUR RIDE!
There was a problem with your
There was a problem with your