A Revolutionary C-10 Build

Since the C-10 craze has exploded, it’s difficult to imagine a time when they weren’t so common. Although some of the C-10 pioneers have been overshadowed by newcomers, back when these innovators were experimenting with classic trucks, modifications were made on a trial-and-error basis. Unlike the current scene, there were no off-the-shelf kits to make C-10s wicked cool. These new products owe a debt to the customizers who made them possible by building trucks like the ’68 you see here.

Inspired by the work of Bob Grant at Grant Kustoms, Clint Petree wanted to create a truck that would turn heads. He planned to drop the ’68 on the ground with an airbagged suspension, and then have Bob work his magic on the sheet metal. If you haven’t seen Bob’s work before, we can attest to his serious metalworking skills and his wild imagination.

While the truck was at Bob’s shop, the two developed a plan to transform it in the vein of a ’69 Camaro. The truck’s lower bodyline was deleted, and the sides were fabbed to resemble Camaro fenders. A new 14-gauge steel and chromed bumper was installed up front, and the grille was opened up by recessing the lights. Then a custom-made billet grille was fit into the opening with a solid billet center piece. Moving back, the center section of a 2002 Silverado cowl hood was formed to the hood of the ’68. The cab cowl continued the flow of the hood before it was welded solid. The top of the cab was chopped 2 inches and single-piece side glass, flush windshield and back glass were installed.

Other modifications include a welded seam on the rear of the cab’s roof, which continues on to the bodyline. The back corners of the cab were squared to minimize the gap between it and the bed. The bed was re-formed with smooth inner walls and custom wheel tubs. The bed floor was also smoothed, and the shape of the hood cowl was worked into it to show off the rear suspension. The tailgate was removed and Bob made a custom combo skin with a center peak before welding it in place. The stock rear taillights were ditched for custom versions by Jamie Bridgeman. In the process of transforming the rear, the bed rails were made the same thickness all the way around. Of course, it was all finished off by shaving the usual items like the door handles and badges.

The focal point of the interior is the center console that starts from the smooth dash and runs to the back of the cab. The interior sheet metal was formed around a set of Tea’s Design bucket seats for a modern look. The roof from a spare C-10 was used to create a smooth sheet metal headliner. Custom door panels were made along with a billet dash bezel created by John and Harold Laisure to house the Dakota Digital gauges and Vintage Air louvers. The interior is simple and mimics the look of the exterior.

At that point, Clint started showing the truck, which became one of the most memorable C-10s of the mid-2000s. But, its time in the limelight was short because people wanted to see the truck finished. Unfortunately, Clint’s personal and professional life prevented him from doing that.

Fortunately, Clint’s longtime friend and former employee at SIC Motorsports, Nick Germano, was inclined to see the truck through to completion. He didn’t want the ’68 to simply fade away, so he exchanged some cash with Clint for the truck.

Nick is the owner of Outkast Kustoms, a shop that consistently pumps out show-quality rides. As the cliché goes, the shop owner’s ride is always sidelined in favor of paying customers’, but after seven years, Nick couldn’t wait any longer to finish the C-10. The major push came when he and his then-fiancée, Ally, decided they wanted the truck finished in time for their wedding. The truck made it to the wedding, but not under its own power. The newlywed couple modified their deadline to the upcoming SEMA Show.

At its debut, the truck blew people’s minds. Though the scene has expanded, the older project has come out on top and shocked newbies.”

Nick finished things up with a few updates, like a modified suspension. Though the rear triangulated 4-link worked great, innovations in front suspensions for these trucks rendered the older version on the path to obsolescence. He implemented Choppin’ Block’s IFS airbag system, and then a modern Chevy LS3 with Holley Terminator wiring and controller was thrown into the mix. It was topped off with an aluminum intake manifold and Scott’s Hotrods & Customs valve covers.

The truck received some bodywork before PPG Toner Red was sprayed. King Kustom Kovers redid the upholstery in leather and suede. The final touches were upgrading the brakes to 16-inch versions from Wilwood and adding a set of 22-inch Intro Raider billet wheels with Pirelli rubber.

At its debut, the truck blew people’s minds. Though the scene has expanded, the older project has come out on top and shocked newbies. Unfortunately, it was recently damaged and is currently under repair. Along the way, Grant Kustoms has already made some additions to it, and the truck will be back on the show circuit soon. ST

---

TRUCK SPECS

Owner

Nick Germano
1968 Chevy C-10
Livermore, CA 

Engine

• Chevy LS3
• Holley Terminator wiring and controller
• Aluminum intake manifold
• K&N air filter
• BeCool radiator
• 2 ½-inch exhaust with Flowmaster mufflers
• Scott’s Hotrods & Customs valve covers
• Vintage Air accessory drive
• Keep It Clean wiring harness
• Custom fuel cell
• 4L80E transmission with Saxco 2,500-stall torque converter
• Master Shift paddle shifter
• South Bay Driveline two-piece driveshaft
• Currie 9-inch rearend

Chassis & Suspension 

• Shop: Outkast Kustoms
• Fully boxed frame
• Choppin’ Block front IFS
• Custom rear 4-link with Watts link
• AccuAir management system
• AVS air tanks
• VIAIR compressors
• Wilwood 16-inch brakes
• Slam Specialties SS-7 airbags, front
• Ridetech front shocks and rear Shockwaves

Wheels & Tires

• 22×9 and 22×11 Intro Raider billet wheels
• 265/35R22 and 315/25R22 Pirelli tires

Body & Paint 

• Shop: Grant Kustoms, Jaimie Bridgeman
• Shaved door handles and badges
• Bodyline deleted and 1968 Camaro bodyline added
• Custom front bumper
• Grille opened with RedLine LumTronix lights recessed
• Custom billet grille by John and Harold Laisure, one-off with solid center by M&L Machining
• 2002 Silverado cowl hood Silverado formed to the C-10 hood
• Custom wiper cowl
• 2-inch chop top
• Single-piece side glass, flush windshield and back glass by Tony at Tri Valley Glass
• Rear roof seam welded
• Roof gutters shaved and bodyline added
• Rear cab corners squared
• Lower front section of bedsides extended to match cab
• Custom wheel tubs with bodyline
• Custom rear combo skin with center peak
• Spaghetti Engineering taillights and handmade lens by Jamie Bridgeman
• PPG Toner Red
• Bodywork and paint by Jaimie Bridgeman

Interior & Stereo 

• Shop: King Kustom Kovers and Grant Kustoms
• Sheet metal dash, center console door panels and back wall
• Smooth headliner made from spare C-10 roof
• Ididit steering column
• Forever Sharp steering wheel
• Custom billet dash bezel by John and Harold Laisure
• Dakota Digital gauges
• Vintage Air AC
• Lokar Performance Products throttle and brake pedal
• Tea’s Design bucket seats covered in leather and suede
• King Kustom Kovers carpet
• Pure Monster sound system by Dennis Krackenberg with Monster Cable

Special Thanks From the Owner: “Clint Petree, Ally Germano, Dale Dameral, Daniel McKeown, Lexie Dameral, Doug Manville, Jamie Bridgeman, Donald Doty, Tony Pimentel, Bob Grant, Pete Janik, Stacy Trevino, Ed Capen, Armando Barragan, Anthony Silva, Gilbert Almeida, Eli Barro, Grant Ragsdale, Adam Calderon, Dennis Krackenberg, Erica Childs, Chris Von Ritter and Don Petree.”

---